DX-19LD-22LD_10-1112 V4.
DX-19LD-22LD_10-1112 V4.book Page ii Tuesday, September 28, 2010 2:10 PM ii Dynex DX-19LD150A11/DX22LD150A11 19" and 22" LCD TV/DVD Combos Contents CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Cautions . . . .
DX-19LD-22LD_10-1112 V4.book Page iii Tuesday, September 28, 2010 2:10 PM iii Playing TV audio only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Automatically searching for TV channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hiding channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DX-19LD-22LD_10-1112 V4.
DX-19LD-22LD_10-1112 V4.book Page 1 Tuesday, September 28, 2010 2:10 PM 1 CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
DX-19LD-22LD_10-1112 V4.book Page 2 Tuesday, September 28, 2010 2:10 PM 2 DX-19LD150A11/DX-22LD150A11 Important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV/DVD combo. This label is located on the back of your TV/DVD combo. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV/DVD combo.
DX-19LD-22LD_10-1112 V4.book Page 3 Tuesday, September 28, 2010 2:10 PM Important safety instructions DX-19LD150A11/DX-22LD150A11 • If your TV/DVD combo has been exposed to rain or water. • If your TV/DVD combo does not operate normally by following the operating instructions.
DX-19LD-22LD_10-1112 V4.book Page 4 Tuesday, September 28, 2010 2:10 PM 4 DX-19LD150A11/DX-22LD150A11 Installing and removing the stand If you plan to use your TV/DVD combo in an upright position on a flat surface, you must install your TV/DVD combo into the stand. If you intend to mount your TV/DVD combo on a wall or other vertical surface, you must remove the stand. Installing and removing the stand Removing the stand If you want to wall-mount the TV/DVD combo, you will need to remove the stand.
DX-19LD-22LD_10-1112 V4.book Page 5 Tuesday, September 28, 2010 2:10 PM TV/DVD combo components TV/DVD combo components DX-19LD150A11/DX-22LD150A11 5 Back Accessories • • • • • • • Power cord TV stand and screws Remote control Remote control batteries (2 AAA) Component video cable Audio cable Quick Setup Guide PC/DVI PB Front PR ## Component Description 1 AC INPUT Connect the power cord to this jack. Note: Even when your TV/DVD combo is off, power is still flowing through it.
DX-19LD-22LD_10-1112 V4.book Page 6 Tuesday, September 28, 2010 2:10 PM 6 DX-19LD150A11/DX-22LD150A11 Side Remote control # Component Description 1 Disc slot Insert a disc (DVD or CD) into this slot to change mode and begin playback. 2 MENU Press to open the on-screen TV menu. 3 TV/DVD combo components EJECT button Press to eject the disc in the disc slot. 4 STOP/ CH button In DVD mode, press to stop playback. In TV mode, press to go to the next channel in the channel list.
DX-19LD-22LD_10-1112 V4.book Page 7 Tuesday, September 28, 2010 2:10 PM Using the remote control # Button 14 (Play/Pause) Description Using the remote control Press once to begin playback. Press again to pause playback. Press once more to resume playback. Installing remote control batteries 15 (Prev) button Press to skip to the previous chapter or track. See “Using the DVD player” on page 28. 16 (Fast Rev) Press to fast-reverse a DVD or CD.
DX-19LD-22LD_10-1112 V4.book Page 8 Tuesday, September 28, 2010 2:10 PM 8 DX-19LD150A11/DX-22LD150A11 Making connections Notes: Do not expose the remote control to shock or liquids. Do not use the remote control in an area with high humidity. Do not place the remote control in direct sunlight. Do not place objects, such as furniture, between the remote control and the remote sensor. The remote control may not work if direct sunlight or bright light shines on the remote sensor.
DX-19LD-22LD_10-1112 V4.book Page 9 Tuesday, September 28, 2010 2:10 PM Making connections DX-19LD150A11/DX-22LD150A11 Connecting an HDMI or DVI device (best picture) Note: If your device has an HDMI connection, we recommend you use that to get the best quality possible. To connect an HDMI device: • Connect one end of an HDMI cable (not included) to the HDMI1 or HDMI2 jack on the back of your TV/DVD combo, then connect the other end of the cable to the HDMI OUT jack on the HDMI device..
DX-19LD-22LD_10-1112 V4.book Page 10 Tuesday, September 28, 2010 2:10 PM 10 DX-19LD150A11/DX-22LD150A11 To connect an antenna, cable TV, or satellite TV box: 1 Connect one end of a 75-Ohm, coaxial cable to the ANT/CABLE IN jack on the back of the TV/DVD combo, then connect the other end of the cable to the antenna or cable TV wall jack.
DX-19LD-22LD_10-1112 V4.book Page 11 Tuesday, September 28, 2010 2:10 PM Turning on your TV/DVD combo for the first time 3 Connect an audio cable to the AUDIO OUT jack on the computer, then connect the other end of the cable to the VGA/DVI AUDIO IN jack on the back of your TV/DVD combo. Note: The audio cable should have a stereo mini plug. DX-19LD150A11/DX-22LD150A11 11 2 Press (Power), then wait several seconds.
DX-19LD-22LD_10-1112 V4.book Page 12 Tuesday, September 28, 2010 2:10 PM 12 DX-19LD150A11/DX-22LD150A11 If you chose Home mode (default - has the same settings as the Energy Saving picture mode), the Choose your TV source screen opens. If you chose Retail mode (has the same settings as the Vivid picture mode), you will be asked whether you really want this mode, because no energy savings will be realized with your TV/DVD combo in this mode.
DX-19LD-22LD_10-1112 V4.book Page 13 Tuesday, September 28, 2010 2:10 PM Understanding the basics Displaying program information DX-19LD150A11/DX-22LD150A11 13 Setup menu To display program information: 1 Press INFO to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution.
DX-19LD-22LD_10-1112 V4.book Page 14 Tuesday, September 28, 2010 2:10 PM 14 DX-19LD150A11/DX-22LD150A11 Adjusting the picture Adjusting the picture To adjust the picture: 1 Press MENU. The on-screen menu opens with the Picture menu displayed. Adjusting the picture • Adaptive Contrast—Enhances contrast between the light and dark areas of the picture. This feature enables automatic contrast adjustment, based on the picture brightness.
DX-19LD-22LD_10-1112 V4.book Page 15 Tuesday, September 28, 2010 2:10 PM Adjusting the sound Adjusting the computer image To adjust the computer image: 1 Make sure that your TV/DVD combo is in VGA mode. For more information, see “Selecting the video input source“on page 12. 2 Press MENU. The on-screen menu opens with the Picture menu displayed. 3 Press or to highlight Settings, then press . The Settings menu opens.
DX-19LD-22LD_10-1112 V4.book Page 16 Tuesday, September 28, 2010 2:10 PM 16 DX-19LD150A11/DX-22LD150A11 Adjusting the sound To adjust the sound: 1 Press MENU. The on-screen menu opens with the Picture menu displayed. Adjusting the sound Playing TV audio only You can turn off the picture on your TV/DVD combo and only listen to the program audio. To play TV audio only: 1 Press MENU. The on-screen menu opens with the Picture menu displayed. 2 Press or to highlight Audio. The Audio menu opens.
DX-19LD-22LD_10-1112 V4.book Page 17 Tuesday, September 28, 2010 2:10 PM Changing channel settings Changing channel settings DX-19LD150A11/DX-22LD150A11 17 5 Press or to select Yes, then press ENTER to automatically start the scan. A progress box shows the progress of the scan. Automatically searching for TV channels Before you can watch TV channels in your area, you need to let the TV/DVD combo scan for available TV channels and store them in the TV channel list.
DX-19LD-22LD_10-1112 V4.book Page 18 Tuesday, September 28, 2010 2:10 PM 18 DX-19LD150A11/DX-22LD150A11 3 Press or to highlight Add/Skip Channels, then press ENTER. The Add / Skip Channels submenu opens. Changing channel settings 4 Press or to highlight the channel you want to include on your Favorites list, then press or to change the setting. If the channel has a check mark next to it, it is marked as a favorite. 5 Press MENU to close the on-screen menu.
DX-19LD-22LD_10-1112 V4.book Page 19 Tuesday, September 28, 2010 2:10 PM Setting parental controls DX-19LD150A11/DX-22LD150A11 19 3 Press or to highlight Channel Labels, then press ENTER. The Channel Label submenu opens. 2 Press 4 Press or to select the channel number you want to label, then press ENTER or . The on-screen keyboard opens. 3 The digital TV signal strength is indicated by the color bar beside the Channel Strength menu item: 4 Press MENU to close the on-screen menu.
DX-19LD-22LD_10-1112 V4.book Page 20 Tuesday, September 28, 2010 2:10 PM 20 DX-19LD150A11/DX-22LD150A11 3 Press or to highlight Parental Controls, then press ENTER. The Enter Password screen opens. Setting parental controls Setting parental control levels You can set parental controls for the U.S. and Canada. The following procedure shows how to set controls for U.S. TV ratings. You use similar steps for controlling U.S. movie and Canadian TV ratings.
DX-19LD-22LD_10-1112 V4.book Page 21 Tuesday, September 28, 2010 2:10 PM Setting parental controls 5 Press or to highlight USA Parental Locks, or Canadian Parental Locks, then press ENTER. The Program type screen opens. Note: If you select Canadian Parental Controls, the language preference screen opens. DX-19LD150A11/DX-22LD150A11 21 Canadian English ratings E Not rated. C Suitable for all children. C8+ Suitable for children 8 and older. G General audiences. PG Parental guidance suggested.
DX-19LD-22LD_10-1112 V4.book Page 22 Tuesday, September 28, 2010 2:10 PM 22 DX-19LD150A11/DX-22LD150A11 Setting parental controls 2 Press or to highlight Settings, then press . The Settings menu opens. Downloading rating information To download rating information: 1 Press MENU. The on-screen menu opens with the Picture menu displayed. 3 Press or to highlight Parental Controls, then press ENTER. The Enter Password screen opens. 2 Press or to highlight Settings, then press . The Settings menu opens.
DX-19LD-22LD_10-1112 V4.book Page 23 Tuesday, September 28, 2010 2:10 PM Using closed captioning 23 DX-19LD150A11/DX-22LD150A11 5 Press or to highlight RRT5 Setting, then press ENTER. The RRT Setting screen opens. 3 Press or to highlight Parental Controls, then press ENTER. The Enter Password screen opens. 6 Press or to highlight a rating type, then press ENTER. The setting screen for that rating type opens. 4 Press the number buttons to input your four-digit password, then press ENTER.
DX-19LD-22LD_10-1112 V4.book Page 24 Tuesday, September 28, 2010 2:10 PM 24 DX-19LD150A11/DX-22LD150A11 To turn closed captioning on or off with the on-screen menus: 1 Press MENU. The on-screen menu opens with the Picture menu displayed. 2 Press or to highlight Settings, then press . The Settings menu opens. 3 Press or to highlight Closed Caption, then press ENTER. The Closed Caption screen opens.
DX-19LD-22LD_10-1112 V4.book Page 25 Tuesday, September 28, 2010 2:10 PM Adjusting time settings DX-19LD150A11/DX-22LD150A11 Customizing digital TV closed captioning styles To customize digital TV closed captioning styles: 1 Press MENU. The on-screen menu opens with the Picture menu displayed.
DX-19LD-22LD_10-1112 V4.book Page 26 Tuesday, September 28, 2010 2:10 PM 26 DX-19LD150A11/DX-22LD150A11 4 Press or to highlight Date/Time, then press ENTER. The Date/Time submenu opens. 5 Press or to select Time Zone, then press or to change the setting to the one for your area. 6 If daylight savings time is used in your area, press or to select Daylight Savings, then press or to change the setting to On. 7 Press or to select Mode, then press or to change the setting to Custom.
DX-19LD-22LD_10-1112 V4.book Page 27 Tuesday, September 28, 2010 2:10 PM Adjusting menu settings DX-19LD150A11/DX-22LD150A11 27 3 Press or to highlight Menu Settings, then press ENTER. The Menu Settings submenu opens. 3 Press or to highlight Input Labels, then press ENTER. The Input Labels submenu opens. 4 Press or to highlight Language, then press or to select the setting you want. You can select English, Français, or Español.
DX-19LD-22LD_10-1112 V4.book Page 28 Tuesday, September 28, 2010 2:10 PM 28 DX-19LD150A11/DX-22LD150A11 2 Press or to highlight Settings, then press . The Settings menu opens. 3 Press or to highlight Reset to Default, then press ENTER. The Reset to Default submenu opens. Using the DVD player The TV/DVD combo will automatically switch to DVD mode. The “Loading” message appears for a few seconds. If you loaded an Audio CD, the file browser screen appears and music playback will automatically start.
DX-19LD-22LD_10-1112 V4.book Page 29 Tuesday, September 28, 2010 2:10 PM Viewing photos To change DVD settings: 1 Press MENU. The on-screen menu opens with the Picture menu displayed. DX-19LD150A11/DX-22LD150A11 29 Viewing photos Your Dynex TV/DVD combo has a photo browser function that allows you to view photos saved to a USB flash drive. Pictures can be viewed in thumbnail mode for easy browsing or you can view them in a slide show. Notes: 2 Press or to highlight DVD, then press .
DX-19LD-22LD_10-1112 V4.book Page 30 Tuesday, September 28, 2010 2:10 PM 30 DX-19LD150A11/DX-22LD150A11 5 Press or to highlight Browse Photo (thumbnail mode), or Slide Show (slide show mode) then press ENTER. Viewing photos 2 Press or opens. to highlight Photo, then press . The Photo menu Viewing photos in thumbnail mode To view photos in thumbnail mode: 1 If you selected Thumbnail as the viewing mode, the Thumbnail screen opens. 3 Press or to highlight Favorite Photo, then press ENTER.
DX-19LD-22LD_10-1112 V4.book Page 31 Tuesday, September 28, 2010 2:10 PM Maintenance DX-19LD150A11/DX-22LD150A11 3 Press or to highlight Settings, then press . The Settings menu opens. 4 Press or to select an option, then press option you prefer. 5 Press MENU to close the on-screen menu. or to select the Cleaning discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
DX-19LD-22LD_10-1112 V4.book Page 32 Tuesday, September 28, 2010 2:10 PM 32 DX-19LD150A11/DX-22LD150A11 Problem Solution Picture has a few bright or dark dots • A few bright or dark dots on an LCD screen is normal. It does not affect the operation of this TV/DVD combo. Good picture, no sound • Increase the volume. • Press MUTE to make sure that the sound is not muted. • Make sure that the audio mode is set to Stereo or Mono. For more information, see “Adjusting the sound” on page 15.
DX-19LD-22LD_10-1112 V4.book Page 33 Tuesday, September 28, 2010 2:10 PM Legal notices USB Power DX-19LD150A11/DX-22LD150A11 Compliance USB 2.0 Device compatibility USB flash drive Input voltage 19-inch - 120 VAC, 0.6 A 22-inch - 120 VAC, 0.88A Consumption 19-inch - <32.4 W 22-inch - <42.
DX-19LD-22LD_10-1112 V4.
DX-19LD-22LD_10-1112 V4.book Page 35 Tuesday, September 28, 2010 2:10 PM Legal notices One-year limited warranty US and Canada Markets Definitions: Dynex Products ("Dynex") warrants to you, the original purchaser of this new Dynex-branded television (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
DX-19LD-22LD_10-1112 V4.
DX-19LD-22LD_10-1112 V4.book Page 1 Tuesday, September 28, 2010 2:10 PM If the power cord has been damaged, it should be replaced by the manufacturer, your service provider or qualified personnel to avoid risks. Si el cordón de alimentación es dañado, este debe ser remplazado por el fabricante o su agente de servicio o por personal calificado para evitar el riesgo. www.dynexproducts.