Quick Start Manual

DX-AC501

500mA Universal AC Adapter

This adapter is designed to supply power to most small electric

devices. To ensure proper conguration of the adapter for your

device, follow these instructions carefully.

Package contents

• 500mA universal AC adapter

• Six plug tips for most common electric devices

• Quick Setup Guide

Getting started

1 Determine the voltage required to power your device and

select the same voltage on the adapter. (Examples include

3V and 4.5V) (You may nd the required voltage beside the

device DC jack.)

2 Locate the DC input on the device (sometimes labeled DC in)

and select the plug that best ts the jack.

3 Determine the polarity required to power the device and

insert the plug into the cable receptacle as follows:

If your device shows a positive polarity symbol on the product,

then insert the plug like this:

QUICK SETUP GUIDE

Note the positive (+) symbol on the plug.

Note the word “TIP” is visible.

PAGE 1
This adapter is designed to supply power to most small electric devices. To ensure proper configuration of the adapter for your device, follow these instructions carefully. Package contents DX-AC501 500mA Universal AC Adapter • 500mA universal AC adapter • Six plug tips for most common electric devices • Quick Setup Guide Getting started 1 Determine the voltage required to power your device and select the same voltage on the adapter. (Examples include 3V and 4.
PAGE 2
4 Connect the adapter to an AC power outlet and operate the device according to the manufacturer’s instructions. Cautions • Unplug the adapter before selecting a new DC output voltage. Failure to do so may damage the device. • The adapter emits heat when operating at its maximum capacity for an extended period of time. Handle it with care when it’s hot. Specifications Model: DX-AC501 Input: 100-240V AC 50-60Hz Output: 3/4.5/6/7.