Instruction manual

Customer Support: 1-800-313-4110

BLG Ver 2.02 Update – p.3

Version History

• Version 1.30 (May 2005)

Select the length of JUMP STITCH not to trim. Confirmation message to lower frame-securing lever will appear

only once after carriage moves to initial position.

• Version 1.20 (February 2005)

Make your machine software compatible with the On Screen Designer™ feature. The On Screen Designer™

Program and the Instruction Manual for this feature are available from the Baby Lock Downloads web site.

• Version 1.10 (October 2004)

Enable your machine to display thread color names for embroidery patterns on the LCD screen. Add the following

languages: Danish, Norwegian, Finnish, Swedish, Portuguese, and Russian.

• Version 1.02 (September 2004)

Changed the embroidery foot height adjustment from 0.1mm to 0.5mm increments and corrected spelling in the

thread color palette screen (RA RAYON/RA POLY)

• Version 1.01 (August, 2004)

Original software

To confirm the software version of your Baby Lock Ellegante

Press the power switch to turn on your machine, touch the LCD screen (if opening screen is

displayed).

Press (Setting Mode Key) at the left bottom of the display.

Go to page 3, and you can see the software version number displayed at the right bottom.

If the version is already 2.02 or higher, it is not necessary to update your Ellegante with the

program on this page.

How to download the update program

The following methods may be used for this update:

Computer USB direct connection

Other USB device (Flash Drive)