Instruction manual

Copyright © 2004-2005 Baby Lock USA
Customer Support: 1-800-313-4110
BLG Ver 2.02 Update – p.4
Computer (USB) Update Instructions
**Note**
Computer USB direct connection function is only available with Microsoft® Windows® 98SE /
Me / 2000 / XP
Windows® 98 SE requires a driver. Please download the “Baby Lock Ellegante USB Driver”
first. After the Driver is installed, the "Removable Disk" folder appears in the "My Computer" folder
on your computer.
1.
Open the "My Computer" folder on your computer.
2.
Turn off the main power switch.
3.
While holding down the automatic needle threading
button, turn on the main power switch. The display at
right will be shown.
Press the computer USB icon on the right.
4.
Connect your computer to the Baby Lock Ellegante with the USB cable that come with your
machine. The "Removable Disk" will appear in the "My Computer" folder on your computer.
5.
Download the Baby Lock Ellegante version.2.02 Update
file “BLG202.upg” from the Baby Lock Web site
(http://www.babylock.com/downloads/) into the
“Removable Disk” folder.
6.
The “connected to PC. Do not disconnect the USB cable.”
Message will appear.
When the message disappears and the display at right
appears, press the “Load” button.
The upgrade file will load.
7.
Note:
If an error occurs, a red text error message will appear.
If the download is performed successfully, an “Upgrade completed.” Message will appear.