DX-CR312_12-0060_MAN_V2_EN.
DX-CR312_12-0060_MAN_V2_EN.fm Page 2 Wednesday, April 4, 2012 3:27 PM 2 DX-CR312 Dynex 20-in-1 Memory Card Reader DX-CR312 Contents Introduction.............................................................. 2 Features.................................................................... 2 Important safety instructions ................................... 3 Card reader components........................................... 3 Card slots ..................................................................
DX-CR312_12-0060_MAN_V2_EN.fm Page 3 Wednesday, April 4, 2012 3:27 PM 20-in-1 Memory Card Reader 3 Important safety instructions Before getting started, read these instructions and save them for later reference. • Before you plug your card reader into your computer, read this user guide. In some operating systems, the driver must be installed before you install your card reader. • Do not drop or hit your card reader. • Do not install your card reader in a location that is subject to strong vibrations.
DX-CR312_12-0060_MAN_V2_EN.fm Page 4 Wednesday, April 4, 2012 3:27 PM 4 DX-CR312 Card slots This diagram shows the correct slots for the different types of media cards supported. Refer to the following section for additional details.
DX-CR312_12-0060_MAN_V2_EN.fm Page 5 Wednesday, April 4, 2012 3:27 PM 5 20-in-1 Memory Card Reader # Media Card Slot Card Image Details 1 SD/SDHC/ SDXC/MMC/ xD Insert Secure Digital card (SD, SDHC, SDXC, Mini SD), MultiMediaCard (MMC, MMCplus, RS-MMC) and xD picture card into this slot. Note: A memory card adapter is required for Mini SD and RS-MMC. 2 microSD Insert microSDHC or microSD cards into this slot. No adapter is required.
DX-CR312_12-0060_MAN_V2_EN.fm Page 6 Wednesday, April 4, 2012 3:27 PM 6 DX-CR312 To remove a memory card using Windows: Caution: Do not insert or remove memory cards while the green data LED on the reader is flashing. Doing so may cause damage to your card or loss of data. 1 When you have finished working with the files on the memory card, right-click the memory card drive in My Computer/Computer or Windows Explorer, then click Eject. The data LED on the memory card reader turns off.
DX-CR312_12-0060_MAN_V2_EN.fm Page 7 Wednesday, April 4, 2012 3:27 PM 20-in-1 Memory Card Reader 7 4 Type a name into the Volume Label box. The name of your memory card appears next to the drive. 5 Click Start, then click OK in the Warning dialog box. 6 Click OK on the Format Complete window. 7 Click Close to finish. Formatting a memory card (Macintosh) Caution: Formatting a memory card permanently deletes all files on the card.
DX-CR312_12-0060_MAN_V2_EN.fm Page 8 Wednesday, April 4, 2012 3:27 PM 8 DX-CR312 • Some cards have a read/write security switch. Make sure that the security switch is set to Write Enabled. • Make sure that the amount of data you attempted to store has not exceeded the capacity of the card. • Inspect the ends of the memory cards for dirt or material closing a hole. Clean the contacts with a lint-free cloth and small amounts of isopropyl alcohol. • If errors persist, replace the memory card.
DX-CR312_12-0060_MAN_V2_EN.fm Page 9 Wednesday, April 4, 2012 3:27 PM 20-in-1 Memory Card Reader 9 Legal notices FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DX-CR312_12-0060_MAN_V2_EN.
DX-CR312_12-0060_MAN_V2_EN.fm Page 11 Wednesday, April 4, 2012 3:27 PM 20-in-1 Memory Card Reader 11 One-year limited warranty Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-CR312 (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
DX-CR312_12-0060_MAN_V2_EN.fm Page 12 Wednesday, April 4, 2012 3:27 PM 12 DX-CR312 • Consumables, such as fuses or batteries • Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
DX-CR312_12-0060_MAN_V2_EN.fm Page 16 Wednesday, April 4, 2012 3:27 PM www.dynexproducts.com (800) 305-2204 © 2012 BBY Solutions, Inc. All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A.
