Service manual

164 Trinix NXT — Installation and Service Manual
Section 3 — Hardware Installation
TRX-NXT-512x512 with Multi Sync References
Figure 83.
In TRX-NXT-512x512 routing switchers, which are normally supplied with
an SR-33500 Sync/OPM board, up to four independent sync sources can be
connected and any of the four can be selected for each output board.
For a discussion concerning which of the four sync references should be
connected to the control system, see
Sync Connection to Control System.
The “C” switch mentioned here and on the following drawings in on the
Trinix rear panel.
Jupiter
Sync 1
1
2
3
4
SR-33500
Output
board(s)
on SL1
Output
board(s)
on SL2
Output
board(s)
on SL3
Output
board(s)
on SL4
Sync Lines
Sync 2
Sync 3
Sync 4
SMS MCPU
Sync 1
or
Encore SCB
OR
Sync Redundant switch = Off
“C” switch = Off
Sync
1