DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 1 Thursday, June 27, 2013 2:04 PM Cross-Cut Paper Shredder DX-PS06CC U S ER G U I D E Before using your new product, please read these instructions to prevent any damage.
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 2 Thursday, June 27, 2013 2:04 PM Cross-Cut Paper Shredder Contents Important safety instructions....................................................................2 Features ....................................................................................................4 Package contents ......................................................................................4 Setting up the shredder ...................................................................
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 3 Thursday, June 27, 2013 2:04 PM Cross-Cut Paper Shredder 3 12 NEVER dispose of flammable chemicals or materials that have come into contact with flammable chemicals (for example, nail polish, acetone, gasoline) in the shredder basket. 13 Never shred plastic (except credit cards), any hard materials, continuous forms, newsprint, or anything with adhesives including labels and envelopes. 14 Do not activate the reverse function while shredding credit cards.
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 4 Thursday, June 27, 2013 2:04 PM 4 DX-PS06CC Avoid loose clothing or jewelry touching the document feed opening. Do not shred paper with paperclips or staples. Do not shred gummed or wet paper. Shred paper and credit cards only. No cardboard, plastic sheets, or CD/DVDs. Do not exceed the shredders maximum capacity of six sheets. Always unplug the unit when not in use to prevent accidents. Do not operate the unit with a damaged power cord.
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 5 Thursday, June 27, 2013 2:04 PM 5 Cross-Cut Paper Shredder Shredder details 5 6 4 7 Ready Overheat 3 6 DX-PS06CC # Feature Description 1 Shredder head Contains the control panel and the cutting head. 2 Waste basket Shredded paper goes into this basket. Keep emptied. 3 Clear window Empty the waste basket when the shredded paper reaches 2/3 of capacity. 4 Switch A three-position slide switch for On/Auto, Off, and Rev.
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 6 Thursday, June 27, 2013 2:04 PM 6 DX-PS06CC Setting up the shredder Warning: Crosscut shredders have very sharp exposed blades on the underside. Use care when mounting the shredder on the wastebasket. Caution: The shredder should not be plugged in during assembly. Note: The following illustrations are for information purposes only. Your actual shredder may look somewhat different than the shredder shown.
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 7 Thursday, June 27, 2013 2:04 PM Cross-Cut Paper Shredder 7 1 Plug in the power cord. 2 To begin shredding, locate the switch on the top of the shredder and select the On/Auto mode. The green power LED indicates the shredder is on and ready to use. Caution: Never shred paper clips, window or insulated envelopes, continuous forms, newsprint, transparencies, laminated documents, cardboard, any items with adhesives, hard materials, or plastic (except credit cards).
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 8 Thursday, June 27, 2013 2:04 PM 8 DX-PS06CC Troubleshooting If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you continue to have problems, contact customer support at our Service Center. DO NOT ATTEMPT TO REPAIR BY OPENING THE SHREDDER HEAD. This will completely void the product warranty.
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 9 Thursday, June 27, 2013 2:04 PM 9 Cross-Cut Paper Shredder Specifications Product dimensions 14.3 in H x 12.5 in W x 7.3 in D (36.2cm x 31.8cm x 18.5cm ) Duty cycle 2 minutes ON / 30 minutes OFF Sheet capacity Six sheets of 20 lb. bond paper (one folded sheet of paper equals two sheets of paper.) Paper shred size 0.19 x 1.34 in (5 x 34 mm) Paper entry width 8.8 in (225 mm) Credit card capacity One at a time Power source US - AC 120V, 60Hz, 1.
DX-PS06CC_13-0652 MAN_V2_ENG.
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 11 Thursday, June 27, 2013 2:04 PM Cross-Cut Paper Shredder 11 One-year limited warranty Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-PS06CC (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 12 Thursday, June 27, 2013 2:04 PM 12 DX-PS06CC • Consumables, such as fuses or batteries • Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 16 Thursday, June 27, 2013 2:04 PM www.dynexproducts.com 1-800-305-2204 (U.S. and Canada) or 01-800-926-3020 (Mexico) Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A. © 2013 BBY Solutions, Inc. All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.