6" LED TV DX-16E220NA16 U SER GUI DE Before using your new product, please read these instructions to prevent any damage.
ii Contents CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iii Connecting a home theater system with multiple devices . . . . . . . . . . . . . . . . . . . 31 Connecting power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iv Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Selecting the menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Labeling an input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 CHILD SAFETY PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions - new and old- must be supported on proper stands or installed according to the manufacturer's recommendations.
2 DX-16E220NA16 Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV. 1 2 3 4 5 6 7 8 9 10 11 12 13 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
DX-16E220NA16 Handling the LCD panel • Your TV’s screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LCD panel. If the screen breaks, be careful of broken glass. • If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation. • If the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor.
4 DX-16E220NA16 End of life directives Non-active pixels Your TV may contain materials that are regulated for environmental reasons. Your TV also contains materials that can be recycled and reused. To help protect the environment, contact your local authorities for information about disposal or recycling and about finding a recycler in your area before you dispose of your TV. The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality.
Dynex 16" LED TV DX-16E220NA16 Dynex 16" LED TV Introduction Congratulations on your purchase of a high-quality Dynex product. Your DX-16E220NA16 represents the state of the art in LED TV design and is designed for reliable and trouble-free performance. Installing the stand or wall mount bracket Notes • If you plan to wall-mount your TV, do not install the stand. • Store the stand in case you decide to use the stand in the future.
6 DX-16E220NA16 Dynex 16" LED TV 2 Find the front of the stand, then hook the tab on the stand column through the slot on your TV. 3 Push the TV stand into the stand column, then twist the stand to the right side until it snaps into place. www.dynexproducts.
Dynex 16" LED TV DX-16E220NA16 Installing the wall-mount bracket Warning This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See “Miscellaneous” on page 61.) 1 Carefully place your TV face-down on a soft surface to protect the screen from damages and scratches. 2 Remove the two screws that secure the stand column to your TV. Note If the TV stand is attached, you do not need to remove the stand before you remove the stand column.
DX-16E220NA16 Dynex 16" LED TV 3 Remove the stand column. 4 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV. Important • Your TV has four VESA mounting holes on the back. If you attach a wall-mount bracket or TV stand to the back of your TV, the bracket or stand must be securely attached using all four holes.
Dynex 16" LED TV DX-16E220NA16 Removing the TV stand from the stand column If you attached the TV stand to the stand column and want to wall-mount your TV, you do not need to remove the TV stand from the stand column. You just need to remove the stand column. Caution To avoid breaking the TV stand when you remove it, make sure that you lift the release latch while you rotate the TV stand counter-clockwise. Be careful not to lift the latch too far because it may break.
10 DX-16E220NA16 Dynex 16" LED TV TV components Buttons Note The buttons are on the top of your TV. Your TV has built-in controls for adjusting basics settings and several sets of jacks for connecting devices to your TV. Package contents • • • • • Remote control and batteries (2 AAA) TV stand AC power adapter QUICK SETUP GUIDE IMPORTANT INFORMATION Front # Item Description 1 MENU Press to open the on-screen menu. For more information, see “Using the on-screen menus” on page 36.
Dynex 16" LED TV Side jacks DX-16E220NA16 # 1 2 3 4 5 Item (audio out) Description Connect headphones, an analog audio amplifier, a home theater system, or a sound bar to this jack. For more information, see “Analog audio” on page 30. USB Connect a USB flash drive to this jack to view compatible JPEG picture files. For more information, see “Connecting a USB flash drive” on page 27 and “Using a USB flash drive” on page 37. HDMI 2 Connect an HDMI device to this jack.
12 DX-16E220NA16 Back Dynex 16" LED TV # Item Description 1 DC IN (12V) Plug the AC power adapter into this connector. AUDIO L and R Connect the audio for a component video device to these jacks. For more information, see “Component video (better)” on page 16, 21, or 24. OR Connect the audio for a composite video device to these jacks. For more information, see “AV (composite video) (good)” on page 17, 22, or 25.
Dynex 16" LED TV DX-16E220NA16 Remote control # Button Press to... 7 CCD Turn closed captioning on or off. You can select CC On, CC Off, or CC On When Mute. See “Turning closed captioning on or off” on page 50. 8 ASPECT Change how the picture looks on the screen (aspect ratio). See the Aspect Ratio option in “Adjusting the TV picture” on page 42. 9 MENU Open the TV menu. 10 ENTER Confirm selections or changes. 11 12 /MUTE Numbers 13 /RECALL Button 1 (power) Set the sleep timer.
14 DX-16E220NA16 Dynex 16" LED TV What connection should I use? Your TV has several connection types for connecting devices to your TV. For the best video quality, you should connect a device to the best available connection.
Dynex 16" LED TV DX-16E220NA16 15 Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 14. HDMI (best) Side of TV On your TV Cable or satellite box HDMI cable connector HDMI cable HDMI jack 1 Make sure that your TV’s AC power adapter is unplugged and all connected devices are turned off.
16 DX-16E220NA16 Dynex 16" LED TV Component video (better) Note Cables are often color-coded to match color-coded jacks. Cable or satellite box On your TV Audio cable Component video cable connectors Audio cable connectors Component video cable Component Analog video jacks audio jacks Back of TV 1 Make sure that your TV’s AC power adapter is unplugged and all connected devices are turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
Dynex 16" LED TV DX-16E220NA16 AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO/Y jack. Cable or satellite box On your TV AV (composite video) cable connector AV (composite video) jack Audio cable connectors AV cable (composite video cable) Analog audio jacks Back of TV 1 Make sure that your TV’s AC power adapter is unplugged and all connected devices are turned off.
18 DX-16E220NA16 Dynex 16" LED TV Coaxial (good) On your TV Cable or satellite box Coaxial cable connector Coaxial cable ANT/CABLE IN jack Back of TV 1 Make sure that your TV’s AC power adapter is unplugged and all connected devices are turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the antenna or cable TV wall jack.
Dynex 16" LED TV DX-16E220NA16 19 Connecting an antenna or cable TV (no box) On your TV Antenna or cable TV (no box) Coaxial cable connector Coaxial cable ANT/CABLE IN jack Back of TV 1 Make sure that your TV’s AC power adapter is unplugged and all connected devices are turned off. 2 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the antenna or cable TV wall jack. 3 Plug your TV’s AC power adapter into a power outlet, then turn on your TV.
20 DX-16E220NA16 Dynex 16" LED TV Connecting a DVD or Blu-ray player Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 14. HDMI (best) Side of TV On your TV DVD or Blu-ray player HDMI cable connector HDMI jack HDMI cable 1 Make sure that your TV’s AC power adapter is unplugged and the DVD or Blu-ray player is turned off.
Dynex 16" LED TV DX-16E220NA16 Component video (better) Note Cables are often color-coded to match color-coded jacks. DVD or Blu-ray player On your TV Audio cable Component video cable connectors Component video jacks Audio cable connectors Component video cable Analog audio jacks Back of TV 1 Make sure that your TV’s AC power adapter is unplugged and the DVD or Blu-ray player is turned off.
22 DX-16E220NA16 Dynex 16" LED TV Composite video (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO/Y jack. DVD or Blu-ray player On your TV AV (composite video) cable connector AV (composite video) jack Audio cable connectors AV cable (composite video cable) Audio jacks Back of TV 1 Make sure that your TV’s AC power adapter is unplugged and the DVD or Blu-ray player is turned off.
Dynex 16" LED TV DX-16E220NA16 Connecting a game console HDMI (best) Side of TV On your TV Game console HDMI cable connector HDMI cable HDMI jack 1 Make sure that your TV’s AC power adapter is unplugged and the game console is turned off. 2 Connect an HDMI cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the game console. 3 Plug your TV’s AC power adapter into a power outlet, then turn on your TV and game console. 4 Press INPUT to open the INPUT SOURCE list.
24 DX-16E220NA16 Dynex 16" LED TV Component video (better) Notes • Your game console may require a special component video cable. See the documentation that came with your game console or check the manufacturer’s Web site. • Cables are often color-coded to match color-coded jacks.
Dynex 16" LED TV DX-16E220NA16 AV (composite video) (good) Notes • Most game consoles come with a special AV (composite video) cable. See the documentation that came with your game console or check the manufacturer’s Web site. • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO/Y jack.
26 DX-16E220NA16 Dynex 16" LED TV Connecting a computer HDMI Side of TV On your TV HDMI cable connector HDMI cable HDMI jack 1 Make sure that your TV’s AC power adapter is unplugged and the computer is turned off. 2 Connect an HDMI cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the computer. 3 Plug your TV’s AC power adapter into a power outlet, then turn on your TV and the computer. 4 Press INPUT to open the INPUT SOURCE list.
Dynex 16" LED TV DX-16E220NA16 27 Connecting a USB flash drive Side of TV USB flash drive Caution Do not remove the USB flash drive or turn off the TV while using the USB flash drive. You may lose data or damage the USB flash drive. 1 Plug a USB flash drive into the USB port on the side of your TV. 2 If your TV is turned on when you connect the USB flash drive, press or to select Yes in the message that appears. The USB menu opens.
28 DX-16E220NA16 Dynex 16" LED TV Connecting headphones When you connect headphones, audio plays through the headphones and the TV speakers are muted. See “Adjusting sound settings” on page 44. Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound.
Dynex 16" LED TV DX-16E220NA16 29 Connecting external speakers or a sound bar Digital audio Side of TV On your TV Digital speaker system Digital coaxial audio cable Digital coaxial audio cable connector Sound bar Digital coaxial audio jack 1 Make sure that your TV’s AC power adapter is unplugged and the digital speaker system or sound bar is turned off.
30 DX-16E220NA16 Dynex 16" LED TV Analog audio Side of TV On your TV Audio cable connector Analog speaker system Sound bar Audio cable (audio out) jack 1 Make sure that your TV’s AC power adapter is unplugged and the analog speaker system or sound bar is turned off. 2 Connect an audio cable (not provided) to the (audio out) jack on the side of your TV and to the AUDIO IN jacks on the analog speaker system.
Dynex 16" LED TV DX-16E220NA16 31 Connecting a home theater system with multiple devices Blu-ray player or DVD player Cable or satellite TV box AV receiver Game console USB flash drive Antenna or cable TV connected directly to the wall jack Computer The connections you make depend on the video and audio jacks available on your devices. Refer to the documentation that came with your devices for connection information.
32 DX-16E220NA16 Dynex 16" LED TV Connecting power 1 Plug the power adapter into the DC IN (12V) jack on the back of your TV. 2 Plug the other end into an AC power outlet. Notes • Your TV should only be operated from the power source indicated on the label. • Always unplug the power adapter from the power outlet when you will not be using your TV for an extended period of time. www.dynexproducts.
Dynex 16" LED TV DX-16E220NA16 Using the remote control 33 3 Replace the battery compartment cover. Cautions • Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire. • Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately. • Make sure that batteries are disposed of correctly. Do not burn or incinerate.
34 DX-16E220NA16 Dynex 16" LED TV Turning on your TV for the first time The first time you turn on your TV, the Setup Wizard opens. The Setup Wizard guides you through setting up basic settings including the menu language, time setting, picture mode, and the TV signal source. 1 Make sure that you have: • Installed the remote control batteries. (See page 33.) • Connected an antenna, cable TV, or satellite TV. (See page 15 through 19.) • Connected the AC power adapter. (See page 32.
Dynex 16" LED TV DX-16E220NA16 A If you are using an antenna for a standard or HD TV signal, select Antenna. Your TV scans for available channels. The scan may take several minutes. During scanning your TV searches for digital channels first. When the digital channel search is complete, a message appears asking if you want to search for analog channels. Select Yes to continue searching for analog channels, or select No to stop searching for channels.
36 DX-16E220NA16 Dynex 16" LED TV Using the on-screen menus Channels menu (TV mode) Notes • Depending on the signal source selected, you may see different options on your screen. The following menus are shown in TV mode. • Menu items that are not selectable are grayed out. Picture menu (TV mode) USB menu (USB mode) Audio menu (TV mode) Navigating the menus Press MENU to open the on-screen menu. Press or to move the cursor on the screen or to adjust a selected item.
Dynex 16" LED TV DX-16E220NA16 Selecting a channel • Press CH+ or CH– to go to the next or previous channel on the memorized channel list. • Press the number buttons to enter the analog or main digital channel number you want, then wait for the channel to change or press ENTER to immediately change the channel. • To select a digital sub-channel, press the number buttons to select the main digital channel, press , then press the number button for the sub-channel.
38 DX-16E220NA16 2 Press Dynex 16" LED TV to access the menu. Photos is highlighted. 5 To navigate the thumbnail index screen, press: • or to browse through the files and folders. • ENTER to view a highlighted photo full screen, or open a highlighted folder. • MENU to open the USB menu. • FAV to add or remove a photo from the favorite photo list. A heart appears on a photo that has been added to the list. • EXIT to return to the USB menu.
Dynex 16" LED TV DX-16E220NA16 Viewing your favorite photos 3 Press ENTER to access the menu. After you have created your favorite photo list, you can browse your favorite photos quickly. 1 Switch to USB mode (see “Switching to USB mode” on page 37). 4 Press or to highlight Favorite Photos, then press ENTER. A thumbnail index of your favorite photos opens. 2 Press to access the menu. Photos is highlighted. 5 You can select photos and navigate on the photo screen the same way you browse photos.
40 DX-16E220NA16 Dynex 16" LED TV Viewing photos in a slideshow 3 Press ENTER to access the menu. 1 Switch to USB mode (see “Switching to USB mode” on page 37). 2 Press to access the menu. Photos is highlighted. 4 Press or to highlight View Slideshow, then press ENTER. A slideshow begins with the first photo in the current folder. 5 To control the slideshow, press: • ENTER to pause or start the slideshow. • EXIT to exit the slideshow and return to the thumbnail index.
Dynex 16" LED TV DX-16E220NA16 Customizing slideshow settings You can customize the slideshow settings by selecting Repeat, Shuffle, Speed, and Transition settings. 1 Switch to USB mode (see “Switching to USB mode” on page 37). 2 Press to access the menu. Photos is highlighted. 3 Press ENTER to access the menu. 4 Press or ENTER. 41 to highlight Settings, then press 5 Press or to highlight an option, then press or to select a setting.
42 DX-16E220NA16 Dynex 16" LED TV Adjusting the picture • Contrast—Adjusts the brightness of the light areas of the picture. • Brightness—Adjusts the brightness of the dark areas of the picture. • Color—Adjusts the color intensity of the picture. A low setting may make the color look faded. A high setting may make the color look artificial. • Tint—Adjusts the color balance of the picture. Use this control to make skin tones look more natural. • Sharpness—Adjusts the color detail of images.
Dynex 16" LED TV DX-16E220NA16 • Aspect Ratio—Adjusts how the picture fills the screen. Aspect ratio option Example Normal: Original aspect ratio is preserved. Black bars are present if content is not widescreen (16:9). 43 Automatically adjusting the aspect ratio You can set the picture mode your TV uses when you turn it on. 1 Press MENU. 2 Press or to highlight Channels, then press or ENTER. Zoom: Expands the image to fill the screen. The top and bottom of the image may be cropped.
44 DX-16E220NA16 Dynex 16" LED TV Adjusting the sound Adjusting sound settings 1 Press MENU. 2 Press or to highlight Audio, then press ENTER. or • MTS/SAP—(Analog channels only) Selects the audio mode. You can select: • Mono—Select this option if there is noise or static on weak stereo broadcasts. • Stereo—Select this option for programs broadcast in stereo. • SAP—Select this option to listen to a secondary audio program, if available.
Dynex 16" LED TV DX-16E220NA16 Setting parental controls Parental controls let you prevent your children from watching inappropriate material on TV. When set, parental controls read the rating of the program (with some exceptions, such as news and sports) and deny access to programs that exceed the ratings level you select. To watch programs that exceed the selected rating, you must enter the password. 45 4 Press the number buttons to enter the four-digit password. The default password is 0000.
46 DX-16E220NA16 Dynex 16" LED TV Locking control buttons Setting the system lock When the button lock is turned On, the buttons on the top of your TV are locked, and you can only operate your TV using the remote control. 1 Press MENU. 2 Press or to highlight Settings, then press . You must turn on the system lock before you can select and change the Block Unrated TV, US, or Canada options. 1 Press MENU. 2 Press or to highlight Settings, then press . 3 Press ENTER. 3 Press ENTER.
Dynex 16" LED TV DX-16E220NA16 Blocking unrated TV When Block Unrated TV is turned on, you block TV programs that do not have a rating. You will be prompted to enter the parental controls password to view the program. 1 Press MENU. 2 Press or to highlight Settings, then press . 7 Press or to select On (blocks unrated TV) or Off (does not block unrated TV). 8 Press MENU to return to the previous menu, or press EXIT to close the menu.
48 DX-16E220NA16 Dynex 16" LED TV Canadian rating levels 4 Press the number buttons to enter the four-digit password.
Dynex 16" LED TV DX-16E220NA16 Downloading rating information 1 Press MENU. 2 Press or to highlight Settings, then press . 49 Adjusting time settings Setting the clock 1 Press MENU. 2 Press or to highlight Settings, then press . 3 Press ENTER. 3 Press or to highlight Time, then press ENTER. 4 Press the number buttons to enter the four-digit password.
50 DX-16E220NA16 Dynex 16" LED TV Setting the sleep timer You can set the amount of time before your TV automatically turns off. 1 Press MENU. 2 Press or to highlight Settings, then press . Using closed captioning Closed captioning displays a text version of the TV program audio or displays information provided by the broadcaster. Turning closed captioning on or off 1 Press MENU. 2 Press or to highlight Settings, then press . 3 Press or ENTER.
Dynex 16" LED TV DX-16E220NA16 Selecting the analog closed captioning mode 51 Selecting the digital closed captioning mode Analog channels usually have one or more closed captioning modes. The CC1 mode usually displays a text version of the TV program audio in a small banner. The other CC modes display information provided by the broadcaster. The Text modes display information in a box that covers half of the screen. 1 Press MENU. 2 Press or to highlight Settings, then press .
52 DX-16E220NA16 Dynex 16" LED TV Customizing digital closed captioning styles 1 Press MENU. 2 Press or to highlight Settings, then press . 3 Press or to highlight Closed Caption, then press ENTER. 4 Make sure that Digital Caption is set to one of the setting from CS1 through CS6. 5 Press or to highlight Digital CC Settings. Adjusting menu settings Selecting the menu language 1 Press MENU. 2 Press or to highlight Settings, then press . 3 Press or to highlight Menu Settings, then press or ENTER.
Dynex 16" LED TV DX-16E220NA16 Labeling an input source You can add a label to a video input source to make it easier to identify. These labels are displayed on the INPUT SOURCE list and on the banner that appears when you press INFO. 1 Press MENU. 2 Press or to highlight Settings, then press . 3 Press or ENTER. to highlight Input Label, then press 5 If you select Custom, press or Custom Label, then press . 53 to highlight 6 Press or to select a character. 7 Press to move to the next position.
54 DX-16E220NA16 Dynex 16" LED TV 3 Press or to highlight Auto Channel Scan, then press ENTER. 4 Press or to highlight Antenna, Cable, or Cable/Satellite Box, then press ENTER. • If you are using an antenna for a standard or HD TV signal, select Antenna. Your TV scans for available channels. The scan may take several minutes. During scanning your TV searches for digital channels first. When the digital channel search is complete, a message appears asking if you want to search for analog channels.
Dynex 16" LED TV DX-16E220NA16 Setting up a favorite channel list 55 Viewing a favorite channel You can create a favorite channel list so you can quickly browse through your favorite channels by pressing FAV, then selecting a channel from the favorite channel list. 1 Press MENU. 2 Press or to highlight Channels, then press or ENTER. 1 Press FAV on your remote control. The Favorites channel list opens. 2 Press or to highlight a channel, then press ENTER to tune to the channel.
56 DX-16E220NA16 5 Press Dynex 16" LED TV to move to the channel label field. Maintaining • Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you. • Storage temperatures are 32° to 122°F (0° to 50°C). • Working temperatures are 41° to 104°F (5° to 40°C). • Do not place your TV in direct sunlight or near a heat source.
Dynex 16" LED TV DX-16E220NA16 4 Press or to select Yes (to reset all settings to factory default), or No (to not reset). If you select Yes, your TV turns off, then turns on again. The Setup Wizard opens. 5 Go through the Setup Wizard. For more information, see “Turning on your TV for the first time” on page 34. Viewing system information You may need to view system information during troubleshooting. 1 Press MENU. 2 Press or to highlight Settings, then press ENTER.
58 DX-16E220NA16 Problem Dark, poor, or no picture (screen is lit), but sound is good. No color, dark picture, or color is not correct. Dynex 16" LED TV Solution Problem • Try another channel. The station may be experiencing problems. • Make sure that the antenna or cable TV is connected correctly and securely. See “Connecting a cable or satellite box” on page 15 or “Connecting an antenna or cable TV (no box)” on page 19. • Adjust the brightness. See “Adjusting the TV picture” on page 42.
Dynex 16" LED TV Problem DX-16E220NA16 Solution Problem The picture has a few bright or dark spots. • A few bright or dark spots on an LCD screen is normal. It does not affect the operation of this TV. Good picture, but no sound. • Increase the volume. • Unplug the headphones. • Make sure that the sound is not muted. • Make sure that the correct audio mode is selected. • Make sure that the audio cables are connected correctly and securely to the back of your TV.
60 DX-16E220NA16 Dynex 16" LED TV General Problem Problem Solution No power. • Make sure that the AC power adapter is correctly connected to your TV and a working power outlet. • Unplug the AC power adapter, wait 60 seconds, then plug the adapter back in and turn on your TV. • Other devices (for example, surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference.
Dynex 16" LED TV DX-16E220NA16 Specifications Outputs Specifications are subject to change without notice. Dimensions and weight Without stand With stand 14.9 × 9.9 × 2.2 in. (37.8 × 25.3 × 5.6 cm) 2.2 lbs. (1.0 kg) 14.9 × 11.6 × 4.7in. (37.8 × 29.4 × 11.9 cm) 2.4 lbs. (1.1 kg) Power consumption LED 60Hz 720p 1366 (H) × 768 (V) 16:9 Power input OSD languages INlink Game Mode ENERGY STAR qualified Internet connectable TV base screws V-Chip (version 2.
62 DX-16E220NA16 Dynex 16" LED TV Programming universal remote controls Dynex TV codes for universal remote controls (for all Dynex TVs manufactured after Jan. 1, 2007) Universal remote control makes and models You can operate your Dynex TV with a new or existing universal remote control. 1 See the table below for common codes. If you have problems programming your remote or need a different remote control code, visit www.dynexproducts.com/remotecodes for the latest remote control code information.
Dynex 16" LED TV DX-16E220NA16 Legal notices 63 HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. FCC Statement This device complies with Part 15 of the FCC Rules.
64 DX-16E220NA16 Dynex 16" LED TV One-year limited warranty - Dynex Televisions Definitions: Dynex Products ("Dynex") warrants to you, the original purchaser of this new Dynex-branded television ("Product"), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product ("Warranty Period").
www.dynexproducts.com US and Canada Market - (800) 305-2204 DYNEX is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2015 Best Buy. All rights reserved.