User's Manual

Dynex 16" LED TV

DX-16E220NA16

www.dynexproducts.com

AV (composite video) (good)

1 Make sure that your TV’s AC power adapter is unplugged and all connected devices are turned off.

2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.

3 Connect an AV cable (not provided) to the VIDEO/Y jack and AUDIO L and R jacks on the back of your TV and to the

composite video and audio out jacks on the cable or satellite box.

4 Plug your TV’s AC power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.

5 Press INPUT to open the INPUT SOURCE list.

6 Press

 or  to highlight Comp/AV, then press ENTER.

Notes

• Cables are often color-coded to match color-coded jacks.

• The yellow video connector on the AV cable connects to the

green VIDEO/Y jack.

Important

•The VIDEO/Y, P

B, and PR video jacks (used to connect a

component device) share AUDIO L and R jacks with the

VIDEO/Y jack (used to connect a composite device). You can

only connect one component video or AV device at a time. We

suggest upgrading to HDMI if your cable or satellite box

supports it.

• When you connect the audio using the AUDIO L and R jacks,

the audio output is analog.

Cable or

satellite box

AV cable

(composite video cable)

Back of TV

(composite

video) cable

connector

(composite

video) jack

Audio cable

connectors

Analog

audio jacks

On your TV