DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 1 Friday, June 7, 2013 7:38 AM A S S E M B LY G U I D E DX-TVM113 Slim-Profile TV Wall Mount Safety information and specifications . . . . . . . . . Tools needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Package contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation instructions . . . . . . . . . . . . . . . . . . . . . . .
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 2 Friday, June 7, 2013 7:38 AM 2 DX-TVM113 Safety information and specifications Safety information and specifications IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS CAUTION: Do not use this product for any purpose not explicitly specified by Dynex. Improper installation may cause property damage or personal injury.
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 3 Friday, June 7, 2013 7:38 AM Package contents 3 DX-TVM113 Package contents Make sure that you have all the hardware necessary to assemble your new TV wall mount: A Wall Plate (1) B Left TV Bracket (1) C Right TV Bracket (1) R Wall Plate Template (1) C B A R DX-TVM113 Wall Plate Template • Gabarit • Plantilla Top Haut Parte superior Top Haut Parte superior Note: For wood frame installations, use a stud finder to locate wood studs first.
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 4 Friday, June 7, 2013 7:38 AM 4 DX-TVM113 Installation instructions Installation instructions STEP 1 - Determine wall-mount location Note: • For more detailed information on determining where to drill your holes, visit our online height-finder at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder • Your TV should be high enough so your eyes are level with the middle of the screen. Normally, 40 to 60 inches from the ground.
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 5 Friday, June 7, 2013 7:38 AM Installation instructions DX-TVM113 5 STEP 2 - Option 1: Installing on a wood stud* wall Note: Any drywall covering the wall must not exceed 5/8" (16 mm). 1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder. 2 Align the wall plate template (R) at the height you determined in the previous step, make sure that it is level, then tape it into place.
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 6 Friday, June 7, 2013 7:38 AM 6 DX-TVM113 Installation instructions STEP 2 - Option 2: Installing on a solid concrete* or concrete block wall CAUTION:To prevent property damage or personal injury, never drill into mortar between blocks. Mount wall plate directly onto the concrete surface. 1 Align the wall plate template (R) at the height you determined in the previous step, make sure that it is level, then tape it into place.
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 7 Friday, June 7, 2013 7:38 AM Installation instructions DX-TVM113 7 STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for instructions.
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 8 Friday, June 7, 2013 7:38 AM 8 DX-TVM113 Installation instructions STEP 4 - Select screws, washers, and spacers 1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If there are screws that came with the TV, they are almost always in the holes on the back of the TV.
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 9 Friday, June 7, 2013 7:38 AM Installation instructions DX-TVM113 9 STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back 1 Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that the brackets are level. 2 Install washers (F or G), and screws (D, I, J, or L) into the holes in the back of the TV. 3 Tighten the screws until they are snug against the TV brackets. Do not over tighten.
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 10 Friday, June 7, 2013 7:38 AM 10 DX-TVM113 Installation instructions STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs 1 Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that the brackets are level. 2 Place spacers (H or N) behind the TV brackets. If you are using M4 washers (F), place them between the spacers and TV brackets and over the holes in the TV brackets.
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 11 Friday, June 7, 2013 7:38 AM Installation instructions DX-TVM113 STEP 6 - Mounting the TV to the wall plate 1 Place the TV brackets (B and C) into the slotted flanges of the wall plate (A). 2 Push the bottom of the TV toward the wall until the latch mechanism clicks into place. HEAVY! You will need assistance with this step.
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 12 Friday, June 7, 2013 7:38 AM 12 DX-TVM113 Installation instructions Removing the TV from the wall plate 1 Grasp the TV by the bottom edge, then pull down on the locking cords and pull the bottom of the TV out from the wall. 2 Release the locking cords and lift the top of the TV from the wall bracket. HEAVY! You will need assistance with this step. Unlatched Pull down to unlatch. Pull bottom away from wall, then lift off the wall bracket.
DX-TVM113_13-0614_MAN_V2_EN-A4.fm Page 16 Friday, June 7, 2013 7:38 AM www.dynexproducts.com (800) 305-2204 Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A. © 2013 BBY Solutions, Inc. All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
