Instruction manual

Connections
En-14
■ 7.1-channel playback
Select the speakers (surround back, front high, front wide) you want to use for 7.1-channel playback.
You can set which speakers you want to use by priority. See “Selecting Speaker Layout” (➔ page 49).
Surround
back left
Surround
left
Surround
right
Front high
left
Front high
right Front leftFront right Center
Front wide
right
Front wide
left
Surround
back right
■ 9.1-channel playback
By adding an external amplifier to the 7.1-channel
configuration shown on the left, you can enjoy 9.1-channel
playback.
Connect your power amplifier’s analog audio input jacks to
the AV receiver’s SB/FH/FW EXT AMP
*1
jacks with
audio cables. To use the SB/FH/FW EXT AMP jacks, you
must specify their channel with the “Preout to External
Amplifier” setting (➔ page 59).
You can set which speakers you want to use by priority.
See “Selecting Speaker Layout” (➔ page 49).
*1
SB···Surround Back, FH···Front High, FW···Front Wide
Surround back left/
Front high left/
Front wide left
Surround back right/
Front high right/
Front wide right
Power amplifier