User Guide

CONTROL PANEL INTERFACE INSTALLATION
Junction Box Cover, Cable Cover, and End Cap
Version 1 Control Panel Interface Installation and User Guide
1-27
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JUNCTION BOX COVER, CABLE COVER, AND END CAP
1 Secure the blower connector cover to the junction box using two 4-40 screws.
This cover attaches opposite the blower connectors.
Figure 1-25: Install the Blower Connector Cover
2 Secure the junction box cover to the junction box using two 8-32 screws.
Figure 1-26: Install the Junction Box Cover
blower connector
cover
blower connector
junction box
junction box cover