User Guide

Control Panel Interface Installation and User Guide
APPENDIXB
Motorized Carriage
B-4
6 Insert the plastic coupler spider on the carriage screw half of the coupler.
7 Place the motorized carriage motor assembly near the motor mount and plug the
motor connector into the motorized carriage cable.
8 Turn the carriage screw to align the coupler jaws with each other and slide the
coupler jaws together until the motor assembly cover is flush with the motor
mount.
9 Secure the motor assembly cover to the motor mount with three 1/4-20 x 1/2-inch
button-head screws.
Figure B-3: Assemble the Motorized Carriage
coupler spider
motor assembly
motor assembly
cover