User Guide

MOTORIZED CARRIAGE AND WHEEL CLAMP INSTALLATION
Wheel Clamp
Version 1 Control Panel Interface Installation and User Guide
B-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WHEEL CLAMP
The wheel clamp allows you to easily adjust for various wheel thicknesses with the
press of a button.
Refer to “Using the Wheel Clamp” on page 2-6 for more information on using the
wheel clamp.
1 Remove the six 1/4-20 x 1-inch screws securing the wheel clamp cover. Remove
the cover and set the cover and screws aside.
Figure B-4: Remove the Wheel Clamp Cover
2 Place the wheel clamp on the carriage. Align the four holes on the wheel clamp
with the holes on the carriage.
3 Secure the wheel clamp to the carriage using four 3/8-16 x 1/2-inch bolts.
Figure B-5: Secure the Wheel Clamp to the Carriage
cover