User Guide

Control Panel Interface Installation and User Guide
APPENDIXC
Installing the Safety Switch
C-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTALLING THE SAFETY SWITCH
Safety requirements of your local country may require that a safety switch is installed.
Be sure to follow the safety requirements specific to your country. The safety switch
requires the air brake to work. This switch is located on the dyno room door; when
the door is open, the air brake is locked. This prevents the dyno from being used
when the door is open.
1 Open the front panel access and turn off the main breaker.
2 Unplug the dyno power cable.
Refer to “Connecting and Disconnecting Power to the Dyno” on page 1-3 for
more information.
3 Remove the eight button-head screws securing the cover and set aside.
4 Remove the cover and set aside.
Figure C-1: Accessing the CPI
PD027
cover
front panel access