User's Manual

Monitor Arm Installation Guide

MONITOR ARM

Installation

INSTALLING THE ARMS AND TRAY

1 Place a bushing on the pin of the first arm and insert the arm into the upright.

Both arms are identical and interchangeable.

2 Place a bushing on the pin of the second arm and insert the arm into the first arm.

3 Place a bushing on the pin of the tray and insert the tray into the second arm.

4 Insert a plastic cap in both ends of each arm.

5 Check for clearance between the monitor arm and motorcycle, walls, ceiling, etc.

Note: Dynojet does not recommend placing the computer CPU on the

monitor/keyboard tray since vibration can cause damage to the computer.

Figure 2: Install the Arms and Tray

tray

second arm

bushing

first arm

bushing

upright