user manual

MOBILE BASE INSTALLATION
Installation
Version 1 Mobile Base Installation Guide
1-7
3 Loosely attach the mobile base frame to the dyno using six 7/16-14 x 1-inch bolts,
twelve 7/16-inch flat washers, six 7/16-inch lock washers, and six 7/16-inch nuts.
Refer to Figure 1-8a and Figure 1-8b.
Note: Be sure the bolts are inserted from the bottom of the mobile base frame.
4 Line up the mobile base frame with the dyno and lower the dyno onto the frame.
Figure 1-8a: Loosely Attach the Mobile Base Frame to the Dyno
Figure 1-8b: Loosely Attach the Mobile Base Frame to the Dyno