User guide

EDDY CURRENT BRAKE INSTALLATION
Eddy Current Brake Installation
Version 3 Model 224 Above Ground Eddy Current Brake Installation and User Guide
1-17
5 Secure the brake frame to the dyno using eight 3/8 x 1-inch bolts and
eight 5/16-inch hardened flat washers. Not all of the bolts and washers are visible
from this view.
6 Torque the brake yoke set screws to 25 foot-pounds.
Figure 1-12: Secure the Brake Frame to the Dyno
Figure 1-13: Eddy Current Brake on Right Side of Dyno
bolts and washers
(not all visible)
bolts and washers
(not all visible)