Installation Guide Owner's manual

INSTALLATION
Pit Covers
Version 4 In Ground Model 200iP/250iP Motorcycle Dynamometer Installation Guide
2-53
7 Place the right side drum cover over the drum module.
8 Loosely secure the right side drum cover to the drum guard bracket using four
1/4-20 x 5/8-inch pan-head torx screws.
9 Loosely secure the right side drum cover using four 3/8-16 x 1/2-inch button-head
flange screws. Do not tighten.
10 Center the drum guard mounting bracket over the drum. Verify the drum does
not contact the mounting bracket.
11 Tighten all screws.
Figure 2-47: Install the Right Side Drum Cover
PD176