Installation Guide User Manual

MODEL 200IX/250IX UPGRADE
Model 200iX/250iX Upgrade Specifications
Version 1 Model 200iX/250iX Upgrade Installation Guide
1-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL 200IX/250IX UPGRADE SPECIFICATIONS
The following specifications and requirements will help you set up your dyno area for
the 200iX/250iX upgrade.
Refer to the model 200i/250i installation guide for specifications and requirements for
the bike dyno.
CHASSIS SPECIFICATIONS
description specifications
Length
dyno with standard carriage allow 271.78 cm (107.00 in.)
dyno with extended carriage allow 322.58 cm (127.00 in.)
dyno with ramp 370.84 cm (146.00 in.)
Height
to top of dyno cover 45.97 cm (18.00 in.)
Width
model 200i/200iX upgrade 200.69 cm (79.00 in.)
model 250i/250iX upgrade 274.32 cm (108.00 in.)
Weight
200iX/250iX drum module/crated 136 kg (300 pounds)/272 kg (600 pounds)
Drum
diameter, 200iX/250iX upgrade 45.72 cm (18.00 inches)
width, 200iX/250iX upgrade 55.88 cm (22.00 inches)
Frame structural steel channel and angle
Maximum Speed 322 KPH (200 MPH)
Maximum Motorcycle Length (front of
front wheel to center of rear wheel)
standard carriage 213 cm (84.00 inches)
extended carriage 256.54 cm (101.00 inches)
Remote Switches remote software control