Installation Guide User Manual

MODEL 200IX/250IX UPGRADE
Trike Carriage Adapter Installation
Version 1 Model 200iX/250iX Upgrade Installation Guide
1-23
INSTALLING THE TRIKE CARRIAGE ADAPTER ASSEMBLY
1 Secure the trike carriage adapter assembly to the dyno using six 5/16 x 1-inch
button-head bolts where the carriage assembly was installed and two 3/8 x 1-inch
button-head bolts as shown in Figure 1-19.
2 Lube the tracks with the included lube or use grease.
Figure 1-19: Installing the Trike Carriage Adapter Assembly
5/16 x 1-inch bolts
3/8 x 1-inch bolts
trike carriage
adapter assembly