Installation Guide Instruction Manual

In Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
CHAPTER 1
Dynamometer Specifications and Requirements
1-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DYNAMOMETER SPECIFICATIONS AND REQUIREMENTS
The following specifications and requirements will help you set up your dyno area
and verify you have the requirements necessary to operate your dyno safely.
CHASSIS SPECIFICATIONS
description specifications
Length
of frame 218.44 cm (86.00 in.)
of frame with eddy current brake 321.23 cm (126.47 in.)
including eddy current brake and
covers
345.44 cm (136.00 in.)
Height
to top of frame 58.42 cm (23.00 in.)
to top of frame with feet/track
assembly
72.07 cm (28.375 in.)
Width
of frame 73.66 cm (29.00 in.)
including cradle assembly 130.18 cm (51.25 in.)
including air brake 93.83 cm (36.94 in.)
both frames, bridge, covers—full out 584.20 cm (230.00 in.)
both frames, bridge, covers—full out
with extension kit
609.60 cm (240.00 in.)
both frames, bridge, covers—full in 469.90 cm (185.00 in.)
both frames, bridge, covers—full in
with extension kit
495.30 cm (195.00 in.)
Track Assembly
Length 234.32 cm (92.25 in.)
Width 218.44 cm (86.00 in.)
Weight
stationary crated dyno 2,114 kg (4,660 lb.)
4WD crated dyno 2,495 kg (5,500 lb.)
Drum
diameter 60.96 cm (24.00 in.)
width 205.74 cm (81.00 in.)
Frame structural steel channel and angle
Maximum Speed 322 KPH (200 MPH)
Maximum Axle Weight 1361 kg (3000 lb.)
Remote Switches remote software control