Installation Guide Owner manual

CHAPTER 3

Bridge Installation—Stationary Dyno

Above Ground Model 424x/424xLC

Automotive Dynamometer Installation Guide

3-34

BRIDGE INSTALLATION—STATIONARY DYNO

Use the following instructions to install the drum guards, runner mounts and

supports, runner assemblies, and the bridge cover.

You will need the following parts:

• 21214703 Runner Clamp Plate (2)

• 21214704 Runner Slide (2)

• 21216101 Drum Guard, Right

• 21216102 Drum Guard, Left

• 21216103 Drum Guard (2)

• 21219511 Stationary Cover

• 21514802 Runner Mount (z-shaped) (2)

• 36562070 Bolt, 1/4-20 x 1.25", Hex (16)

• 36580434 Bolt, 3/8-16 x 1/2", Button-Head, Flange, Allen (4)

• 36582034 Bolt, 3/8-16 x 1.25", Button-Head, Flange, Allen (8)

• 36582471 Bolt, 3/8-16 x 1.5", Flange-Hex (6)

• 36588071 Bolt, 3/8-16 x 5", Black Oxide (16)

• 36701100 Nut, 1/2-13, Hex (8)

• 36800000 Bolt, 1/2-13 3", Hex (8)

• 36912100 Washer, 1/4", Splitlock, Steel (16)

• 36923100 Washer, 3/8", Hardened, Flat, Steel (24)

• 36932100 Washer, 3/8", Splitlock, Steel (24)

• 36942100 Washer, 1/2", Splitlock, Steel (8)

• 37513200 Anchor, Redhead, 3/8" (4)

• 37518200 Redhead Anchor Installation Tool

• 61314500 Runner Support Assembly (4)

• 61319500 Runner Assembly (30)

• DM150-011-004 Nut, 3/8-16, Hex (16)

• DM150-011-006 Bolt, 3/8-16 x 1.25", Hex (8)