Installation Guide

PC6-16017
21 Using the supplied Velcro, secure the PC6 to the top
of the battery tray lid.
Clean both surfaces with the supplied alcohol swab
prior to applying the Velcro adhesive.
22 Reinstall fuel tank and seat.
Download the latest map files from our web site at
dynojet.com/tunes.
15 Locate the front ignition coil on the left hand side of
the bike above the front cylinder head.
16 Unplug the BLUE/YELLOW wire from the coil.
17 Plug the set of GREEN colored wires of the PC6 in-
line with the BLUE/YELLOW wire and the coil.
18 Remove the battery tray lid.
19 Attach the ground wire from the PC6 to the negative
side of the battery.
20 Reinstall battery tray lid making sure it does not
pinch the ground wire.