Installation Guide

PC6-16035
19 Locate the Front Ignition Coil of the forward left side
of the frame.
20 Unplug the BLUE/YELLOW wire from the ignition coil’s
GREEN spade terminal.
21 Unplug the BLACK/WHITE wire from the ignition coil’s
BLACK spade terminal.
22 Plug the pair of RED colored wires of the PC6 in-line
of the Front Ignition Coil’s BLACK spade and the
stock BLACK/WHITE wire.
23 Plug the pair of GREEN colored wires of the PC6 in-
line of the Front Ignition Coil’s GREEN spade and the
stock BLUE/YELLOW wire.
24 Secure the ground wire of the PC6 wiring harness
with the eyelet to the common ground location above
the Front Ignition Coil.
25 Reinstall the fuel tank, body work, and the seat.
Note: This unit is shipped with a stock map for
the 2002-2004 49 state C model. Make sure to
download the correct map for your application and
modifi cations.
Download the latest map fi les from our web site at
dynojet.com/tunes.
Optional Inputs:
Speed Input - PINK/GREEN wire of the ECM.
Temp Input - PINK/WHITE wire of the ECM.
12v Source for Autotune - BLACK/BROWN wire of the tail
light.
16 Locate the Rear Ignition Coil on the right side of the
frame.
17 Unplug the stock YELLOW/BLUE wire from the
ignition coil’s GREEN spade terminal.
18 Plug the pair of BLUE colored wires of the PC6 in-line
of the Rear Ignition Coil’s GREEN spade and the stock
YELLOW/BLUE wire.