Installation Manual

Q515.001

2002-2003 Polaris

Sportsman 700 Twin

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

K&N Filter # N/A

1 Main Jet DJ134

1 Main Jet DJ136

1 Main Jet DJ138

1 Main Jet DJ140

1 Main Jet DJ142

1 Main Jet DJ144

1 Main Jet DJ146

1 Main Jet DJ148

1 Fuel Needle DNO201

1 Slide Spring DSP007M

1 Adjusting Washer DW0001

1 E-clips DE0001

1 Screw DS0001

1 Plug Drill DD #5/32

Parts List

PAGE 1
Q515.001 2002-2003 Polaris Sportsman 700 Twin Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
STAGE ONE INSTRUCTIONS Q515.001 1. Remove vacuum slide from the carb. Remove stock needle & spacers, noting order of assembly (Fig. A). 2. Install Dynojet needle on groove #3 for applications below 3000 feet, groove #2 for above 3000 feet, using all stock spacers. Install the Dynojet washer above the E-clip. 3. Install the Dynojet slide spring (DSP007M) in place of the stock slide spring. This is Groove # 1 4. Remove stock main jet.