Assembly Instruction Manual

SPRING APPLIED AIR RELEASE (SAAR) BRAKE ASSEMBLY INSTALLATION
The Hydraulic Brake Assembly
Version 1 Spring Applied Air Release (SAAR) Brake Assembly Installation
9
5 Slide the brake clevis pin into the square recesses provided. The brake clevis pin
will only slide in one direction. You may need to slide your brake clevis pin
opposite to the direction shown in Figure 8 if your brake clevis pin faces the other
way. After you remove the hydraulic brake assembly, you will reach in to remove
the pivot pins from inside the square recesses.
Figure 8: Slide the Brake Clevis Pin into the Square Recess
BR016
slide brake clevis pin into
square recess