Installation Guide

4 2009-2020 YAMAHA V-MAX

INSTALLATION GUIDE

6 Plug the connectors from the PC6 in-line of the stock

wiring harness and throttle bodies.

9 Using the supplied Velcro, secure the PC6 to the

plastic cover under the right hand side cover. Mount

the PC6 behind the stock electronics.

Make sure to clean both surfaces with the alcohol

swab before attaching.

10 Install the covers and seat.

Download the latest map ﬁ les from our web site at

dynojet.com/tunes.

7 Using the supplied Posi-

tap attach the GREY wire

of the PC6 harness to the

stock WHITE wire of the

small ECU plug.

This is pin #5.

8 Attach the ground wire of the PC6 to the negative

side of the battery.