Users Guide

EMS-D10 Pilot’s User Guide 4-1
4. AVAILABLE PAGES
The EMS main pages use various combinations of circular gauges, vertical and horizontal bars, tic marks, and text to
display EMS data. Appropriate units of measurement accompany their respective values. Color indicators (green, yellow,
and red) are used to denote normal and abnormal operational ranges.
Both the EMS Main Pages and the EMS Auxiliary Page allow for “info items,” user-configurable elements such as
vertical info bars, contact input readouts, flaps/trim indication, and text-only items. Vertical info bars can display volts,
amps, fuel pressure, carburetor air temperature, coolant temp/pressure, and outside air temperature. Contact input
readouts can display discrete data (e.g., open/closed, on/off, etc.). Flaps and trim displays display icons indicating the
absolute position of the flaps and trim. Vertical info bars, contacts, flaps/trim indicators, and text-only items are defined
at time of installation and instrument setup. Text info items include fuel economy, engine timers, and times. For more
information on configuring this display (as well as info items on the EMS Main Page), see the Global Configuration
Settings section on page 7-5. Menu and Checklist pages may be displayed and are described in the following sections.
Note: EFIS-based pages use data that is obtained from Dynon’s EFIS products. You may only display these pages
on your EMS-D10 if you own a Dynon EFIS-based product, and the two units are connected via DSAB. Refer to
the EMS-D10 Installation Manual for details regarding proper connection between Dynon products and other
devices in your system. Please see your EFIS-based product’s Pilot’s User Guide for information on configuring
the various displays sourced from it.