Users Guide

Available Pages
4-4 EMS-D10 Pilot’s User Guide
Some info items, when displayed on the Aux Page, have quick commands to be displayed in the AUX menu. This menu
is populated with commands in the order that the items appear on screen (from top left to bottom right). The commands
are listed below.
Info item quick commands
 TIMERS info item – TRPRST (resets the trip timer), TIMER (shortcut to the general purpose timer menu)
 FUEL TIMERS – FUEL (shortcut to the add fuel menu)
For more information on configuring clock and timer settings and info items (both on this page and on the EMS main
page), see the Clock Setup section on page 7-3 and the Info Item section on page 7-5.
EMS Fuel Computer Page
Available in 1/3 format
This page displays fuel tank levels, fuel flow, fuel pressure, fuel remaining,
fuel used, and time remaining. If a compatible GPS is connected to your
Dynon system as described in the EMS-D10 Installation Guide, this page
will also display current distance per unit fuel, fuel at waypoint, and
distance to empty (range). Analog gauges display sensor information and
textual readouts display computed data. Much of the computed data is
reliant on the optional fuel flow sensor, available from Dynon Avionics.
To obtain accurate data, you must reset the fuel computer every time you
add fuel to the aircraft. Note that "fuel used" resets itself when the unit
detects that oil pressure has exceeded 15 PSI for the first time after being
powered on. This allows you to view the fuel used value from your last
flight.