User's Guide

Com Radio Operation
9-12 SkyView HDX Pilot’s User Guide – Revision G
• ATC: When on the ground: Tunes pre-taxi, clearance, and departure frequencies
associated with an airport. When in the air: Tunes departure, center, and approach
frequencies when associated with an airport. As of SkyView software version 15.1,
there is no longer filtering of ATC frequencies when on the ground and in the air. All
ATC frequencies can be tuned at any time.
Other Status Information
Operating Without SkyView
The SV-COM-X25, SV-COM-X83, and SV-COM-C25 can be used when SkyView is powered off or
has failed. However, only manual tuning will be available, and the control panel will display
NoSV. The control panel annunciates this condition in the following way:
You may see this annunciation as your SkyView displays first power up, as they take longer to
initialize than the Com radio.
No Aviation Database
If SkyView does not have an aviation database loaded the airport loading and
TWR/ATIS/GND/ATC buttons will not be available. The control panel annunciates this condition
by displaying NoDB: