Instructions

EN
DYON SIGMA 24 DVD
28
Important!
Use the EXIT or MENU button to cancel the channel
scan.
Please note that if you cancel the scan, no stations will be
stored and therefore no station picture will be displayed.
First aid!
No transmitter is displayed after the first installation.
- Check that the antenna cable is correctly connected
to both the junction box and the device.
- Make sure that both the correct reception mode and
the correct reception path have been selected. If you
are not sure, please perform the initial installation
again using the "ADVANCED" menu and the "First
installation" menu item.
- If a CI module error such as "NO CI module" or
"Error code 17" is displayed, this can have various
causes. Please refer to the chapter
"Troubleshooting".