User's Manual

Document Number 001
DOC
–
Wifi Module Installation
Guide
Revision
006
© Dyson Technology Limited 2015
5
The antenna is a double sided PCB printed monopole. It is L-shape on top side and Inverted F IFA on
the other side as shown in the Figures 1, 2 below.
The antenna is printed on PCB carrier board 35mm x 35mm x 1.6mm and 4.2 FR4. The wifi module is
mounted on the same board.
Figure1, PCB Printed antenna Top Side
Figure2, PCB Printed antenna Bottom Side