SDS
Page 3/7
Dyson Battery Pack 7-Cell (206340)
Revision: 07
Revised date: 30-Jan -2018
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
In the unlikely event that liquid leaks from the battery, Wear personal protective
equipment (Safety gloves, goggles and gas mask for organic gases). Avoid skin contact.
6.2. Environmental precautions
Dispose of damaged battery pack in accordance with federal, state and local regulations.
Cover battery pack terminals to prevent accidental short-circuit when batteries are mixed.
6.3. Methods and material for containment and cleaning up
Use absorbent material (sand, vermiculite, etc.) to absorb any exuded material. Seal
leaking battery (unless hot) and contaminated absorbent in a plastic bag and dispose of
in accordance with local regulations.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Do not disassemble, open, remodel, or solder. Do not short + and – terminals with metal.
Charge with a Dyson charger designed for use with this battery pack.
The battery may present a risk of fire or burns if mistreated. Do not disassemble, crush,
short contacts, heat above 140°F (100°C), or incinerate. Do not use pack if damaged.
7.2. Conditions for safe storage, including any incompatibilities
Store at < 45°C. Avoid overheating, e.g. through incident solar radiation or radiant heat
source. Do not expose to water or condensation.
SECTION 8: Exposure controls/personal protection
8.2. Exposure controls
Personal Protection is not required under normal usage.
In the unlikely event that liquid leaks from the battery do not touch the liquid. Provide
appropriate ventilation, do not inhale vapour, use gas masks for organic gases if
necessary. Wear safety glasses, safety gloves, and clean up according to Section 6.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical State
Solid
Colour
N/A
Odour
None
pH-
N/A
Relative density
N/A
Solubility in water (g/L)
Insoluble