OPERATING MANUAL ASSEMBLY Remote control docks magnetically.
DYSON CUSTOMER CARE THANK YOU FOR CHOOSING TO BUY A DYSON APPLIANCE Your Dyson appliance will be covered for parts and labour for 2 years from the date of purchase, as detailed in the terms of the Dyson guarantee in this Dyson Operating Manual. If you have a query about your Dyson appliance, call the Dyson Customer Care Helpline quoting your serial number and details of where and when you bought the appliance. Alternatively, contact us via the website.
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING THIS APPLIANCE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL AND ON THE APPLIANCE When using an electrical appliance, basic precautions should always be followed, including the following: WARNING 1. 2. THE FAN AND THE REMOTE CONTROL BOTH CONTAIN MAGNETS. Pacemakers and defibrillators may be affected by strong magnetic fields.
IMPORTANT SAFETY FEATURES For your safety this appliance is fitted with automatic cut-out switches that operate if it tips over or overheats. If the switches operate, unplug the appliance and allow it to cool. Before restarting, check and clear any blockages and ensure the appliance is on a solid level surface. READ AND SAVE THESE INSTRUCTIONS THIS DYSON APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY Do not pull on the cable. In order to avoid overheating and fire hazard, do not cover the appliance.
Power Each time the heating mode is selected, it conducts a short calibration cycle. Airflow will be automatically controlled during this cycle. Once the calibration cycle is complete, it will revert to the selected airflow speed. On first use, the appliance will default to a temperature 3°C higher than the detected room temperature. Thereafter, the appliance will remember the last target temperature set. Select the desired room temperature.
Tilt function Sleep timer To set the sleep timer, press and hold the timer button to select the desired time. When time reaches zero, the appliance will go into standby mode. To cancel, reduce the time until two dashes appear. Diffused and personal heating modes Diffused mode Press the wide angle button to change from personal heating to whole room heating. Heating and cool modes work in this mode. Personal heating Press the narrow angle button to change from whole room heating to personal heating.
Clearing blockages Ensure the appliance is unplugged and has been allowed to cool. Look for blockages in the air inlet holes and in the small aperture inside the air loop amplifier. Use a soft brush to remove debris. CAUTION: hot when in use Cleaning Unplug from the mains electricity supply. Allow to cool for 1 to 2 hours before cleaning if the appliance has been in use. To clean, wipe with a dry or damp cloth. Do not use detergents or polishes. Battery replacement Battery type CR 2032.
• • • • • • • • • • • • • • • USING YOUR DYSON APPLIANCE DYSON 2 YEAR GUARANTEE Please read the 'Important Safety Instructions' in this Dyson Operating Manual before proceeding. TERMS AND CONDITIONS OF YOUR DYSON 2 YEAR GUARANTEE. LOOKING AFTER YOUR DYSON APPLIANCE Do not carry out any maintenance or repair work other than that shown in this Dyson Operating Manual, or advised by the Dyson Customer Care Helpline. Always disconnect the plug from the mains before inspecting for problems.
DYSON CUSTOMER CARE Your Dyson appliance will be covered for parts and labour for 2 years from the date of purchase, as detailed in the terms of the Dyson guarantee in this Dyson Operating Manual. If you have a query about your Dyson appliance, call the Dyson Customer Care Helpline quoting your serial number and details of where and when you bought the appliance. Alternatively, contact us via the website. Most queries can be solved over the phone by one of our Dyson Customer Care Helpline staff.
GUARANTEE FORM Date of purchase / / Country of purchase Australia New Zealand Serial number Title Surname First name Address Postcode email Mobile Telephone Store of purchase Privacy Act Dyson Appliances Ltd (Dyson) may collect and use your personal information to provide you updates on latest products and services, to analyse and research customer’s choice on products, to provide products and services you have requested and for other purposes relating or incidental to product guarantee (e.g.
