User Guide

20 21
Changing the glass HEPA filters
The shrouds will release
with the glass HEPA
filters attached.
Plug the appliance in to the mains
electricity supply and switch on.
Press and hold the Night mode
button on the remote control.
The display on the appliance will
countdown from five, finishing with
the default screen. The glass HEPA
filter level will be reset and the
appliance is ready to use.
Unplug the appliance from
the mains electricity supply.
Slide the buttons down on
both sides of the shrouds.
Important: Always unplug the
appliance before changing filters.
The remaining filter life is shown in
the display and will indicate when
the non-washable glass HEPA filter
needs replacing.
Dispose of used filter units in
accordance with local regulations.
Push the new glass HEPA filters
into the shrouds until secure.
Empty the glass HEPA filters
directly into the bin by pushing
in both the purple tabs on
the shrouds.
Push the shrouds until they click back
into position in the base.
clik
x2
clik
x2
x2
x2
clik
x2
clik
x2
x2
x2
clik
x2
clik
x2
x2
x2
x2
x2
x2
x2
clik
clik
x2
x2
x2
x2
clik
clik
1 2 3
clik
x2
clik
x2
x2
x2
x2
x2
x2
x2
click
click
4 5 6 7
5
sec
Important