Dyson ball animal © 00.00.00 VERSION NG.
In the box R Tool holder Vacuum cleaner Wand Some tools and accessories may not be included. You can buy additional fools and accessories at www.dyson.com.
Getting started Lean fo clean Lean handle back fo start a clean. Leave upright fa direct suction to the wand. High-reach wand with quick release The hose and wand release in one action for easy fool changes. Power button Press the power button fo start cleaning. Brush bar control Turn off the brush bar for delicate floors or deep pile rugs. Ball technology 3 cleaning modes Easy to maneuver.
Assembling your machine Fit the cleaner head Lay your machine on its back. Slide your Motorbar™ cleaner head into position on the from of the ball. Push upwards unfit the red bunion on the underside of your machine clicks securely in place. Stand your machine upright. Fit the wand Slide the handle onto your machine until it clicks into position. Position the wand info the and of the hose. Crass the wand release bunion on the end of the hose and skids the wand all the way down.
Caring for your floors Check that the underside of the cleaner head or tool is clean and free from any objects that may cause damage. Bafflers vacuuming your flooring, rugs, and carpets, check the manufacturer's recommended cleaning instructions. The brush bar on your machine can damage certain flavoring. Some rug materials may fuzz if a rotating brush bar is used when vacuuming. If this happens, we recommend vacuuming without the motorized floor foal and consulting with your flooring manufacturer.
Using your tools Attach to the wand Open the cop on the handle and slide the wand upwards until both the wand and has release from the machine. Push the fool into the end of the wand. Remove from the wand Remove the fool and slide the wand back into the hose. Position the wand and hose in the recess on the handle of your machine. Attach to the hoses Open the cop on the handle and slide the wand upwards until both the wand and hose release from the machine.
Emptying your bin Emily as soon as he dirt reaches the MAX level don't overfill. Using your machine when the dirt is above the MAX line may affect the performance and require more frequent filter washing. Remove your bin Turn off and unplug your machine. Crass tha button on the bin handle to detach the bin from your machine. Release th Hold your bin, with the bin base pointing down, over your rash can. Firmly push the button on the bin handle, until the bin base opens.
Clearing blockages if any part of your machine becomes blocked, i may automatically cut out and the power will stop. Unplug and leave your machine to cool before checking for blockages. Remove cleaner head Lay your machine on its back. Push down the red button on the bathroom of the ball and then slide your cleaner head down and off your machine. Check the wand Open the cap on the handle and slide the wand upwards until both the wand and hose release from the machine.
© Clearing obstructions from your Motorbar™ cleaner head Your Motorbar™ cleaner head doesn’t have a washable brush bar. To maintain optimum performance, check your brush kar regularly and clear any obstructions. Unplug and save your machine fo cool before checking for blockages. Remove cleaner head Lie your machine on its back. Push down the rad button on the bathroom of the ball and then slide your cleaner head down and off your machine.
Washing your filters Wash your filters at least once @ month fo maintain optimum suction power. For more information and support videos for your machine go online: Washing filter A Remove your filter Press the bunion on the bin handle fo detach the bin from your machine. Wash your filter Push up the catch on the front of the bin handle and lift out the filter. Only wash th filter with cold water. Hold he open end of the filter under a running tap, until the water runs clear.
Washing filter B Remove your filter Lay your machine on its side with the filter cover facing upwards. Turn the lock in the center of the ball until the filter cover is released. Lift off the filter caver. Twist the filter counter-clockwise until it is released and lift it off your machine. ‘Wash your filter Wash the filter in a rotating motion. Repeat until the water runs clear. Tap the filter to remove excess water.
Looking after your machine To always get the best performance from your machine, i's important to clean it regularly and check for blockages. Look after your machine your machine is dusty, wipe with a damp lint-free cloth. Check for blockages in the cleaner head, tools and main body of your machine. Wash your filter regularly and leave fo dry completely. Dormouse detergents or polishes to clean your machine. Your serial number You can find your serial number on your machine, behind the bin.