Technical Specifications

TECHNICAL SPECIFICATION

SIDE ELEVATIONREAR ELEVATION

Mounting

Bracket

(including

2 fixings)

Fixing

locations

(4)

Cable

entry

point

Alternative

cable entry

point

All dimensions shown in mm (+/-5mm)

Recommended installation heights from floor

Male

X 1050mm Y 990mm Z 390mm

Female X 975mm Y 915mm Z 315mm

Child or disabled X 875mm Y 815mm Z 215mm

Machine dimensions

Height 661mm Width 303mm Depth 247mm

Minimum clearance

200mm from floor; 50mm clearance either side and above machine.

Cable entry point from floor

Male

725mm

Female 650mm

Child or disabled 550mm

FLOOR

For further information please contact Dyson.

0800 345 7788 (UK) 01-401-8300 (IE)

www.dysonairblade.com

PAGE 1
Technical specification REAR ELEVATION SIDE ELEVATION Mounting Bracket (including 2 fixings) Cable entry point Alternative cable entry point Fixing locations (4) All dimensions shown in mm (+/-5mm) Floor Recommended installation heights from floor Minimum clearance Male X 1050mm Y 990mm Z 390mm 200mm from floor; 50mm clearance either side and above machine.
PAGE 2
Electrical Input voltage/Frequency: 200-240V 50 & 60 Hz Rated power: 1600 W Motor type: Dyson digital motor V4 – brushless DC Motor Motor switching rate: 6,000 per second Motor speed: 90,000 rpm Operating temperature range: 0°– 40°C Heater type: None Standby power consumption: Less than 0.5 W Construction Casing construction: Polycarbonate-ABS casing Antibacterial coating type: Contains antibacterial moulded additive in fascia and blades. Can help prevent the growth of bacteria.