2 3 3 4 4 5 5 Warranty information Assembling your light Positioning your light Color temperature and brightness Settings Disabling/Enabling Bluetooth® wireless technology USB-C charging point CD06 JN.00000 PN.000000-00-00 00.00.00 VERSION NO.
Thank you for choosing to buy a Dyson Light Take full control with the Dyson Link app. Your machine warranty We don’t stop caring about our machines once they’re yours. Even after your warranty has ended, we’ll still be on hand to help. Get step-by-step set up and support. Control how and when your Dyson Light operates. Your serial number can be found on the rating plate located on the bottom of your light. Note your serial number for future reference.
Assembling your light Power Brightness Settings Don’t remove the protective wrapping from the horizontal arm before your light has been assembled. Place the base on the floor and insert the vertical stem into the base. Insert the screw into the vertical stem and tighten fully, with the tool supplied. Remove any protective wrapping from your light. Plug in and switch on. Insert the power cable into the base, making sure it sits in the cable guide. Download the Dyson link app and add your light.
Color temperature and brightness Swipe to change the color temperature of the light from warm through to cool. Tap to change quickly between color temperatures. Swipe to change the brightness of the light. Tap to change quickly between brightness levels. To find out more about color temperature and brightness levels, and to get the best from your light, go to the Dyson Link app or online at: www.dyson.
Disabling/Enabling Bluetooth® wireless technology Your light has Bluetooth® wireless technology enabled by default. Press and hold the middle button until the LED lights on the three buttons blink. The main light source will turn off and then on again to show that Bluetooth has been disabled. To re-enable Bluetooth, repeat the instructions above. The main light will blink twice to show that Bluetooth has been re-enabled. USB-C charging point Plug in your mobile devices to charge up to 1.5A at 5V.