Manual

AI0480 DCI4 USA OWNER_MAN.q-. pl 6/3/04 1:12 PM Page ii
CAUTION
oTurn power off and unplug
before checking for
blockages+ Failure to do
so could result in electric
shock or personal iniury+
oif any part of your
machine becomes
blocked, it may overheat
and then automatically
shut off+ Unplug
machine and leave to
cod down+
Please note: Clearing
blockages is not covered
by your machine's limited
war ra nty+
Beware of sharp obiects
when clearing blockages+
Replace all parts of the
machine before using it+
if you hear a loud rachet
noise it means the
brushbar is obstructed+
Disconnect the machine
before removing the
obstruction+
ili_ii ,_ifi
Check tools are dear of
blockages+
DC 14 wand
A Release wand from
vacuum by pressing hose
button and sliding hose
off wand+ Check inside
wand and hose for
blockages+
B Press hose release button
at front of machine and
slide hose out with lower
cord hook at rean
U bend inspection
C Tilt machine forward, slide
out U bend and check
inside for blockages+
Airway inspection
D Squeeze valve release
buttons and check inside
for blockages+
Brushbar obstructions
Lie cleaner on its front+
Undo soleplate fasteners
using a coin and remove
soleplate+
Remove lint and hair from
brushban
Replace soleplate and
tighten fasteners+
Ensure soleplate is fitted
ms
E_
_7
0
0
@
£
C
0
0
@
£
C
0
<>