User manual HP06
A Contents Getting started 3 3 5 6 6 7 8 8 8 8 9 9 9 10 Activating your warranty Important safety instructions Assembling your machine Using your machine Power and continuous monitoring Information menu Auto mode Heating Oscillation Airflow Sleep timer Night mode Looking after your machine Additional information Thank you for choosing to buy a Dyson air purifier and heater Take full control with the Dyson Link app Get step-by-step setup and support.
Activating your warranty We don’t stop caring about our machines once they’re yours. After registering your free two-year warranty, your Dyson air purifier and heater will be covered for parts and labour (excluding filters) for two years from the date of purchase, subject to the terms of the warranty. Three easy ways to activate your free 2-year warranty On your mobile Download the Dyson Link app and you will be taken through registration as part of the set up.
10. Do not use this appliance in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided. 11. To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 metre from the air outlet. 12. Do not use outdoors or on wet surfaces and do not handle any part of the appliance or plug with wet hands. 13. Keep the appliance away from flammable liquids, vapours, air fresheners and essential oils.
Assembling your machine Use both hands to lift your machine out of the box, by its base. Do not lift out by the loop amplifier. clik Your machine comes with a permanent Dyson Cryptomic™ filter and a Combination filter. Place the remote control on the top of the machine with the buttons facing down. Push down the shroud release buttons on both sides of your machine to release the shrouds. Plug in and switch on. Remove the Combination and Dyson Cryptomic™ filters from any protective packaging.
Using your machine Remote control Standby on/off Standby on/off Tilt control Power and continuous monitoring Standby on/off Press the Standby on/off button on your Dyson air purifier and heater or remote control to stop your machine. It will continue to monitor the air quality. Continuous monitoring on/off Press and hold the Auto mode button on the remote for five seconds to enable it. The LCD screen will indicate when continuous monitoring is enabled or disabled.
Information menu Press this button to scroll through the information being monitored by your Dyson air purifier and heater. Information about air quality, temperature, humidity and filter levels are shown. When a pollutant causes the air quality to drop, the relevant symbol will show on the LCD screen. Indoor air quality - 12 seconds Monitors the current air quality with a graph showing the last 12 seconds of data.
Auto mode Heating Set your Dyson air purifier and heater to Auto mode and the on-board sensors will intelligently adjust the settings of the machine according to the air quality. Press the Heating mode button to set the required room temperature. Air quality: Your machine will pause when the target air quality has been reached, switching on again when the air quality levels drop. Airflow speed: The airflow speed will increase until the target air quality and temperature have been reached.
Sleep timer Night mode Your Dyson air purifier and heater will turn off automatically after the selected amount of time. In Night mode, your Dyson air purifier and heater will continue to monitor and respond to changes in air quality and temperature, but only using its quietest settings – and with its LCD screen dimmed. To set the time: Press the button to scroll through the time options. Once activated, press the Sleep timer button once to see the time selected.
Additional information CONTROL WITHOUT THE REMOTE • Your machine can be controlled through your Dyson Link app. If you are in any doubt as to what is covered by your warranty, please contact the Dyson Helpline. DYSON LINK APP CONNECTIVITY • You must have a live internet connection in order for the Dyson Link app to work. • Yout machine can connect to either 2.4GHz or 5GHz networks which includes most modern routers. Check your router documentation for compatibility.
Dyson customer care If you have a question about your Dyson machine, call the Dyson Helpline with your serial number and details of where and when you bought the machine, or contact us via the Dyson website. www.dyson.in JN.108791 PN.297127-07-02 22.07.20 Dyson contact details www.dyson.in 1800 258 6688 (Toll Free) ask@dyson.in Dyson Technology India Pvt. Ltd.
