User manual In the box Getting started Charging your machine Changing your battery Emptying your bin Washing your bin Washing your filter Washing your brush bars Washing your non-powered tools Clearing blockages
In the box Vacuum cleaner Wand Charger Charges your vacuum with or without a dock. Combination tool Two tools in one – wide nozzle and brush, for quick switching between cleaning and dusting tasks around your home or car. Dyson omnidirectional soft roller cleaner head Four 360° stabilizing casters allow the cleaner head to glide in all directions, making it easy to navigate around obstacles and clean in tight spaces.
Getting started Power button Easy power selection buttons for simple control and added maneuverability. Press the button to change power modes. Eco mode The optimum balance of power and run time. Max mode Delivers maximum power. For intensive cleaning of ground-in dirt. Dyson omnidirectional soft roller cleaner head Four 360° stabilizing casters allow the cleaner head to glide in all directions, making it easy to navigate around obstacles and clean in tight spaces.
Charging your machine For the best experience, we recommend fully charging your machine as soon as you open the box and after every clean. The LED light on the end of the handle will flash when the power is running low and to charge your battery. It can take up to 3.5 hours to fully charge your battery. Your battery has been designed to be left on charge.
Emptying your bin Empty your bin as soon as the dirt reaches the MAX mark. You may need to clean the filter more often if you use your machine with a full bin. 1 2 3 Press the red wand release button and pull the wand away from the bin. Hold your vacuum over a bin. To close the bin, push the bin base upwards until the bin and lid both click into place. Reconnect the wand. Push the red bin release button, taking care not to press the power button.
Washing your filter Wash your filter at least once a month 1 performance. to maintain the best Make sure the filter is completely dry before refitting. 2 2 3 1 Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. Turn your filter counterclockwise and pull it away from your machine. Before washing your filter, tap it gently over a bin to remove any excess dust and debris. Wash your filter with cold tap water.
Washing your brush bars To maintain optimum performance, check and wash your brush bars regularly. 1 2 3 clik Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. Press the cleaner head release button to remove it from the wand. Push the button on top of the cleaner head to release the brush bars. Slide them out of the cleaner head. Pull the brush bars off the end cap and put the end cap to one side, don’t wash it.
Washing your non-powered tool Combination tool Wipe your non-powered tool with a damp cloth only.
Clearing blockages If your machine detects a blockage, the motor will pulse six times, You won’t be able to use your machine until the blockage has been cleared. Leave your machine to cool down before looking for blockages and, for your safety, take care not to touch the power button. If you try to use your machine when the motor is pulsing, it will automatically cut out. 1 2 Be careful of sharp objects that may be blocking your machine.
