Data Sheet

-35-
39. Individually Switch-controlled Electrical Appliances
Build the circuit above. Press the switch (62) and the motor (95) will start spinning. Press the switch (62) again and the
motor (95) will stop. Press and hold the press switch (61) and the lamp (76) will turn on. Release the press switch (61)
and the lamp (76) will turn off.
In rooms with ceiling fans there are typically two switches on the wall with a circuit like this where one switch turns on and
off the fan and one switch turns on and off the light in the room.
WARNING: Moving parts. Do not touch
the fan or motor during operation. Do
not lean over the motor.
!