Data Sheet

-59-
101. Four Beats per
Second
Build and turn ON the circuit
shown. The lamp (76) will ash
approximately four times per
second.
102. Taking a Rest
Turn ON the switch (62) and if the
lamp (76) is ashing press and
release the press switch (61) and
the lamp (76) will turn off. Now
hold the press switch (61) and
the lamp (76) will ash the beat
again. Release the press switch
(61) to take a rest.
103. Touch-controlled Slow Flashing Lamp
Press the switch (62) and the lamp (76) will ash slowly. Press the press switch (61) and the lamp (76) will turn off. Touch
the touch plate (80) and the lamp (76) will ash slowly again.
104. Magnet-controlled Slow Flashing Lamp
Replace the press switch (61) with the reed switch (83), press the switch (62) and the lamp (76) will ash slowly. Move
the magnet (7) towards the reed switch (83), the lamp (76) will turn off. Now place the magnet (7) on the reed switch (83)
and do not move it. The lamp (76) will ash slowly, but when you move the magnet (7) away, the lamp (76) will turn off.
1st level
2nd level
1st level