User's Instructions

[phone] • [e-mail] • http://www.e-chronos.ch • VAT-TVA: CHE-288.065.258
BCJ SA: IBAN CH50 0078 9100 0020 4220 4 - BIC BCJUCH22XXX
4. Intergration instructions for host product
4.1. List of applicable FCC rules
FCC
47CFR Part 15C
4.2. Specific operational use conditions
Depending on the used antenna type (internal / external) the RF Module can be either
integrated in portable or mobile/fixed categorized host devices.
The maximum allowed antenna gain is 6,0 dBi.
RF Exposure considerations must be done for each individual host type/antenna
combination.
The module is a class A device in terms of §15.3 (h).
4.3. Limited module procedures
This RF module is exclusively approved for the integration into host devices by the
Grantee or his authorized OEM integrator.
4.4. RF exposure consideration
For all final host devices the RF exposure are observed in integration process. A
distinction is drawn between portable device and mobile/fixed device.
For portable device:
For any application the necessary separation distance between the radiating part
(antenna) and the human body incl. bystander will be calculated based on the module
output power in combination with the antenna gain of the used antenna and position with
respect to FCC KDB447498 and ISED RSS-102.
For mobile/fixed device:
The device is categorized as mobile/fixed where a minimum separation distance of >20
cm between the antenna and any human body is assured during normal operating
conditions.
For RF exposure the following RF Exposure Warning will be included:
“To comply with FCC RF exposure compliance requirements, the antenna must be
installed to provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or transmitter”.
4.5. Antennas
The antenna that is used in connection with radio module depends on host device (e.g.
portable, mobile fixed device).
All usable antennas are provided by E-Chronos SA.
4.6. Statements for host manual
Statement FCC §15.105 for host manual
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this