User's Manual


 3/4
3. Work with laptop/ notebook computer /PC
As the Bluetooth version for laptop/ notebook computer /PC is various, the connection methods are different as well, if you can not
connect with the unit for play on first use, you may need to install a new version of the Bluetooth driver in your laptop in advance.
Please reference the instructions of laptop for details.
z Play mode
1. Bluetooth mode: play the audio signal from Bluetooth device connected with the unit.
2. AUX mode: play the audio signal from the audio device with “AUX IN” port.
Note: As long as the Aux cable is connected to the speaker, it will not play the music from Bluetooth
z Play the music
Play the audio signal from Bluetooth device
1. Follow the above connection steps to pair the Bluetooth device and the unit.
2. Enter in the Bluetooth device audio play menu, choose your favorite music to play.
3. Press the power button to turn on or turn off your unit as you need.
AUX IN：
1. Plug one end of the supplied aux cable to the “AUX IN” port in the back of unit, and then plug the other end of the cable to audio
device.
2. Choose directly your favorite music in the audio device to play
3. Press the power button to turn on or turn off your unit as you need.
z Adjusting the volume
Press the volume button on the unit or control the Bluetooth device volume directly to adjust the volume.
Technical parameters
Note: All specifications are subject to change without notice.
Product Name: Crescent Bluetooth speaker
Model Name：HT2008
Power Supply: 4x AAA batteries/USB 5V
Output power: 2 x 1.5W
Bluetooth Profile Supported: A2DP, AVRCP
Working range: up to 8m
Working atmosphere: 0℃-40℃/20%-90%RH
Maintenance
Please follow the instructions below before clear the unit
z Unplug the power cable and uninstall batteries first before clear
z Use a soft, dry, lint-free cloth to wipe gently
z Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored
Storage
z If the unit will not be used for an extended period of time, unplug the power cord and place the unit with accessories into the
package.
z Do not set the unit in a damp, high temperature or the sun point-blank place.
Troubleshooting
Question: Can’t pair successfully after multiple connections ？
Solution：
（1） Check if the blue indicator on the buttons lights on, if the indicator goes off, please press the power button, if the blue power
indicator doesn’t light on yet, please make sure USB cable is connected tightly or the batteries in the unit is full voltage.
（2） Perhaps there are many Bluetooth devices around the surroundings to interfere the searching, please close the Bluetooth
function in the device you don’t need.
（3） Power off and then power on the unit, to restart the Bluetooth function on the unit or on your Bluetooth device.