Datasheet

40
v1.4 / Modification rights reserved
EE160
Specially designed for HVAC, the EE160 sensor by E+E Elektronik is a cost-
effective, highly accurate and reliable solution for measuring relative air humidity and
temperature.
The enclosure minimizes installation costs and provides outstanding protection
against contamination and condensation, thus ensuring flawless operation.
The EE160 employs the new humidity/temperature E+E sensor element HCT01 with
excellent long term stability and resistance against pollutants. In combination with
a long calibration experience, the EE160 provides a measurement accuracy of
±2.5%RH and is available for wall or duct-mounted with current, voltage or
Modbus RTU output.
The configuration equipment allows user setup for the output scaling and for the interface parameters, as well as humidity and
temperature adjustment of the sensor.
EE160
HVAC Humidity and
Temperature Transmitter
Easily Adapted for the US
Market
» Knockout for ½” conduit
tting
External mounting holes
» Mounting with closed cover
» Electronics protected against
construction site pollution
» Easy and fast
mounting
Bayonet Screws
» Open/closed with
a ¼ rotation
Cast Electronics
» Mechanical protection
» Condensation-resistant
Electronics on the
Underside of the PCB
» Optimum protection against
mechanical damage during
installation
E+E Humidity sensor HCT01
» Long-term stability
» Protected RH sensor surface
» Protected solder pads
» Tested according to automotive
standard AEC-Q200
EE160
EE160