Brochure

v1.6 / Modification rights reserved
Accessories
Accessories
Filter Caps for Humidity and Dewpoint Transmitters
The choice of appropriate filter cap is essential for the long term performance of the sensor in a certain application.
For assistance please contact your local support - http://www.epluse.com/en/service-support/locations-distributors/.
FILTER NAME CONSTRUCTION FEATURES APPLICATIONS TYPE NO.
MEMBRANE Body: polycarbonate
Filter: PTFE membrane
Pores size: 1µm
Length: 34mm (1.34“)
Very good protection against fine dust
T range: -40…80°C (-40...176°F)
Response time t
10/90
: 15s
Building automation
Dusty environment
HA010101
STAINLESS STEEL
SINTERED
Material: sintered stainless
steel
Pores size: 10µm
Length: 33mm
(1.30“)
For high mechanical stress and
strong pollution
T range: -40…180°C (-40...176°F)
Response time t
10/90
: 30s
Industrial process control
Agriculture
Life stock barns
Unsuitable for condensing
environment
HA010103
(for plastic probes)
HA010117
(for metal probes)
PTFE Material: PTFE sintered
Pores size: 50µm
Length: 33mm
(1.30“)
For very dirty, oily environment
T range: -40…180°C (-40...176°F)
Response time t
10/90
: 14s
Industrial process control
Chemical industry
Very polluted environment
Unsuitable for condensing
environment
HA010105
METAL GRID Body: polycarbonate
Filter: stainless steel wire
mesh
Pores size: 30µm
Length: 33mm
(1.30“)
For low mechanical stress and
low pollution level
For high RH / condensing environment
T range: -40…120°C (-40...248°F)
Response time t
10/90
: 15s
Climate control
Dryers and humidiers
HVAC
HA010106
STAINLESS STEEL
GRID
Body: stainless steel
Filter: stainless steel wire
mesh
Pores size: 30µm
Length: 39mm
(1.54”)
For average mechanical stress and
low pollution level
For high RH / condensing environment
T range: -40…120°C (-40...248°F)
Response time t
10/90
: 15s
Industrial process control
Clean rooms
HA010109
H
2
O
2
Material: PTFE sintered
Pores size: 50µm
Length: 33mm (1.30“)
Catalytic filter for H
2
O
2
environment
T range: -40…180°C (-40...176°F)
Response time t
10/90
: 14s
Pharmaceutical
Biotech
Sterilization with H
2
O
2
HA010115
PTFE STAINLESS
STEEL
Body: stainless steel
Filter: PTFE membrane,
replaceable
Pores size: 2µm
Length: 39mm
(1.54”)
For average mechanical stress
High pollution levels
T range: -40…180°C (-40...176°F)
Response time t
10/90
: 14s
Water ingression pressure > 0.5bar
For EE33-J and EE33-K in:
Meteorology
Continuous high humidity
Condensing environment
HA010114:
complete filter
HA010114ME:
PTFE membrane
METAL GRID FOR
EE08
Body: polycarbonate
Filter: stainless steel wire
mesh
Pores size: 30µm
Length: 25mm
(1”)
For low mechanical stress
Low pollution level
For high RH / condensing environment
T range: -40…120°C (-40...248°F)
Response time t
10/90
: 15s
Meteorology
Climate control
HA010113
STAINLESS STEEL Material: stainless steel
Openings: ø3mm
Length: 32mm
(1.26”)
For moisture in oil transmitters and
handhelds
Hydraulic, lubrication and
isolation oil monitoring
HA010110
Accessories
176