User Manual
Thanks for your purchase of the
Programmable USB Keypad. It is specially
designed for users who need repetitive
keystrokes and texts such as graphic designers, architects, web masters
and accountants. PK-2068 includes 26 programmable/ 22 relegendable
keys up to 30 characters per key except “Enter” key that allow the users to
label them. The built-in memory allows the keypad to be used under IBM
compatible PCs without installing resident software.
Installation
Step 1: Insert CD and double click PK-2068.msi or you can download the
driver from www.elsra.com/support-Driver.html
Step 2: After install PK-2068.msi, you
will find a short-cut icon, PK-2068 on
your desk.
Step 3: Please double click PK-2068
icon. The keypad layout will display on
your screen as right picture.
The beneath of Keypad layout, you will find a message “ USB Device
detect…”. It means that the programing software is waiting for PK-2068
to be connected.
Step 4: Plug USB cable of PK-2068 into
your PC or NB. It will show
“ USB Keyboard Device get”.
It means that the software
detect PK-2068 numeric
keypad. Then you can start to
program your keypad.
Tips for Mode change
Click the button “MOD0”, the button will
change to “MOD1”,
In MOD1 all keys except “Enter” are
programmable and the key will be
highlighted once it programmed.
How to Program
Step 1: Click icon of PK-2068. The keypad layout will be shown on screen.
(Please make sure your PK-2068 is well plug into PC or NB. The beneath
dialogue box will show “ USB Keyboard Device get”)
Step 2: Click the programmable key at MOD0 or MOD1. The virtual
keyboard will pop up on your screen.
Step 3: Move the cursor to any keys you want to program, then the key will
highlight for a while and the related character will appear in the dialog
box, after input completed, click the “Program” button to finish program
action.
Program with modifier keys
To use modifier keys like “Shift”, “Ctrl”, “Alt” as composite function,
double click on it and the modifier keys will be highlighted. Move cursor
to other keys you want to composite (e.g.,B key), the dialog box will
appear “Shift+b”, “Ctrl+b”, “Alt+b” respectively.
Exercise I.
If you want to program “Print preview” in Excel; Alt F V
Step 1. Double click Alt which will be highlighted in yellow. Then press f
as follows.
Step 2: Click Alt key again (to release Alt function), the Alt key becomes
black as other keys does. Then press v
Step 3: Click “Program” button.
Exercise II.
If you want to program “ Creates a new document”, Ctrl+N.
Step 1: Double click Ctrl which will be highlighted in yellow. Then press
N key as follows.
Step 2: Then click
Program button
www.elsra.com
Programmable
USB Numeric Keypad
(New Edition)
User
’
s Manual (PK
-
2068)
Mode Switch
USB Device detect…..
These upper 4 blank keys are
programmable keys in “MOD0”
and the key will be highlighted
once it programmed.