System information
Table Of Contents
- SAFETY TRAINING INFORMATION
- TABLE OF CONTENTS
- FEATURES
- CONTROLS AND DISPLAY
- GENERAL OPERATION
- RADIO-WIDE FEATURES
- CONVENTIONAL MODE FEATURES
- Monitoring Before Transmitting
- Monitor Mode
- Busy Channel Lockout
- Call Guard Squelch
- Penalty Timer
- Conversation Timer
- Repeater Talk-Around
- Displaying Transmit and Receive Frequency
- Emergency Mode
- Conventional Mode Scanning
- Priority Channel Sampling
- Placing and Receiving Conventional Calls
- Project 25 (Digital) Mode Features
- Keypad Programming
- SMARTNET/SMARTZONE FEATURES
- SUPERVISORY TONES
- INDEX
5
May 2002
Part No. 002-5100-100
FEATURES
FEATURES
General Features
• The following operating modes are programmable:
– Conventional analog
– Conventional Project 25 (digital)
– SMARTNET
™
/SmartZone
®
trunked
• Up to 500 channels/talk groups programmable
• Zone select
• Large graphic display with backlight
• Up to 9 (limited keypad) or 21 (DTMF keypad)
programmable option keys
• Menu mode
• Standard and radio-wide scan modes
• User selectable and editable scan lists
• Time-out timer
• User selectable high and low power output
• Keypad lock
• Power-up password to prevent unauthorized use
Conventional Features
• Repeater talk-around
• Monitor mode selectable by option key or menu
• Carrier or Call Guard
®
(CTCSS/DCS) controlled
squelch on analog channels. Carrier, NAC and talk
group IDs on digital channels.
• Penalty and conversation timers
• Priority channel sampling when scanning
• Busy channel lockout (transmit disable on busy)
• DES-OFB encryption available (P25 channels)
• Unit (Individual ID) calls on Project 25 channels
• Keypad programming (Fed Gov. users only)
• Emergency key (Project 25 channels)
SMARTNET/SmartZone Features
• Group, Enhanced Private Conversation™, Private
Conversation II™, and Telephone Calls
• Emergency alarms to alert a dispatcher of
emergency conditions
• Emergency calls for high priority system access
• Failsoft operation on a predefined conventional
channel if trunked system fails
• Priority group calls detected while listening to other
group calls
• Call Alert™ (send and receive pages)
• Predefined messages (up to 16) can be sent to a
dispatcher
• Predefined status conditions (up to 8) can be sent to
a dispatcher
• Dynamic regrouping (dispatcher can automatically
gather users on a channel to receive a message)
• Roaming (SmartZone only)
• SecureNet™ secure communication available
NOTE: The availability of many of the preceding fea-
tures is determined by system operator programming
of your transceiver, installed options, and the capabili-
ties of the radio system being accessed.